Package tar
Overview ▸
Index ▸
Constants
Type flags for Header.Typeflag.
const (
// Type '0' indicates a regular file.
TypeReg = '0'
// Deprecated: Use TypeReg instead.
TypeRegA = '\x00'
// Type '1' to '6' are header-only flags and may not have a data body.
TypeLink = '1' // Hard link
TypeSymlink = '2' // Symbolic link
TypeChar = '3' // Character device node
TypeBlock = '4' // Block device node
TypeDir = '5' // Directory
TypeFifo = '6' // FIFO node
// Type '7' is reserved.
TypeCont = '7'
// Type 'x' is used by the PAX format to store key-value records that
// are only relevant to the next file.
// This package transparently handles these types.
TypeXHeader = 'x'
// Type 'g' is used by the PAX format to store key-value records that
// are relevant to all subsequent files.
// This package only supports parsing and composing such headers,
// but does not currently support persisting the global state across files.
TypeXGlobalHeader = 'g'
// Type 'S' indicates a sparse file in the GNU format.
TypeGNUSparse = 'S'
// Types 'L' and 'K' are used by the GNU format for a meta file
// used to store the path or link name for the next file.
// This package transparently handles these types.
TypeGNULongName = 'L'
TypeGNULongLink = 'K'
)
Variables
var (
ErrHeader = errors.New("archive/tar: invalid tar header")
ErrWriteTooLong = errors.New("archive/tar: write too long")
ErrFieldTooLong = errors.New("archive/tar: header field too long")
ErrWriteAfterClose = errors.New("archive/tar: write after close")
ErrInsecurePath = errors.New("archive/tar: insecure file path")
)
type FileInfoNames ¶ 1.23
FileInfoNames extends fs.FileInfo. Passing an instance of this to FileInfoHeader permits the caller to avoid a system-dependent name lookup by specifying the Uname and Gname directly.
type FileInfoNames interface {
fs.FileInfo
// Uname should give a user name.
Uname() (string, error)
// Gname should give a group name.
Gname() (string, error)
}
type Format ¶ 1.10
Format represents the tar archive format.
The original tar format was introduced in Unix V7. Since then, there have been multiple competing formats attempting to standardize or extend the V7 format to overcome its limitations. The most common formats are the USTAR, PAX, and GNU formats, each with their own advantages and limitations.
The following table captures the capabilities of each format:
| USTAR | PAX | GNU ------------------+--------+-----------+---------- Name | 256B | unlimited | unlimited Linkname | 100B | unlimited | unlimited Size | uint33 | unlimited | uint89 Mode | uint21 | uint21 | uint57 Uid/Gid | uint21 | unlimited | uint57 Uname/Gname | 32B | unlimited | 32B ModTime | uint33 | unlimited | int89 AccessTime | n/a | unlimited | int89 ChangeTime | n/a | unlimited | int89 Devmajor/Devminor | uint21 | uint21 | uint57 ------------------+--------+-----------+---------- string encoding | ASCII | UTF-8 | binary sub-second times | no | yes | no sparse files | no | yes | yes
The table's upper portion shows the Header fields, where each format reports the maximum number of bytes allowed for each string field and the integer type used to store each numeric field (where timestamps are stored as the number of seconds since the Unix epoch).
The table's lower portion shows specialized features of each format, such as supported string encodings, support for sub-second timestamps, or support for sparse files.
The Writer currently provides no support for sparse files.
type Format int
Constants to identify various tar formats.
const (
// FormatUnknown indicates that the format is unknown.
FormatUnknown Format
// FormatUSTAR represents the USTAR header format defined in POSIX.1-1988.
//
// While this format is compatible with most tar readers,
// the format has several limitations making it unsuitable for some usages.
// Most notably, it cannot support sparse files, files larger than 8GiB,
// filenames larger than 256 characters, and non-ASCII filenames.
//
// Reference:
// http://pubs.opengroup.org/onlinepubs/9699919799/utilities/pax.html#tag_20_92_13_06
FormatUSTAR
// FormatPAX represents the PAX header format defined in POSIX.1-2001.
//
// PAX extends USTAR by writing a special file with Typeflag TypeXHeader
// preceding the original header. This file contains a set of key-value
// records, which are used to overcome USTAR's shortcomings, in addition to
// providing the ability to have sub-second resolution for timestamps.
//
// Some newer formats add their own extensions to PAX by defining their
// own keys and assigning certain semantic meaning to the associated values.
// For example, sparse file support in PAX is implemented using keys
// defined by the GNU manual (e.g., "GNU.sparse.map").
//
// Reference:
// http://pubs.opengroup.org/onlinepubs/009695399/utilities/pax.html
FormatPAX
// FormatGNU represents the GNU header format.
//
// The GNU header format is older than the USTAR and PAX standards and
// is not compatible with them. The GNU format supports
// arbitrary file sizes, filenames of arbitrary encoding and length,
// sparse files, and other features.
//
// It is recommended that PAX be chosen over GNU unless the target
// application can only parse GNU formatted archives.
//
// Reference:
// https://www.gnu.org/software/tar/manual/html_node/Standard.html
FormatGNU
)
func (Format) String ¶ 1.10
func (f Format) String() string
type Header ¶
A Header represents a single header in a tar archive. Some fields may not be populated.
For forward compatibility, users that retrieve a Header from Reader.Next, mutate it in some ways, and then pass it back to Writer.WriteHeader should do so by creating a new Header and copying the fields that they are interested in preserving.
type Header struct {
// Typeflag is the type of header entry.
// The zero value is automatically promoted to either TypeReg or TypeDir
// depending on the presence of a trailing slash in Name.
Typeflag byte
Name string // Name of file entry
Linkname string // Target name of link (valid for TypeLink or TypeSymlink)
Size int64 // Logical file size in bytes
Mode int64 // Permission and mode bits
Uid int // User ID of owner
Gid int // Group ID of owner
Uname string // User name of owner
Gname string // Group name of owner
// If the Format is unspecified, then Writer.WriteHeader rounds ModTime
// to the nearest second and ignores the AccessTime and ChangeTime fields.
//
// To use AccessTime or ChangeTime, specify the Format as PAX or GNU.
// To use sub-second resolution, specify the Format as PAX.
ModTime time.Time // Modification time
AccessTime time.Time // Access time (requires either PAX or GNU support)
ChangeTime time.Time // Change time (requires either PAX or GNU support)
Devmajor int64 // Major device number (valid for TypeChar or TypeBlock)
Devminor int64 // Minor device number (valid for TypeChar or TypeBlock)
// Xattrs stores extended attributes as PAX records under the
// "SCHILY.xattr." namespace.
//
// The following are semantically equivalent:
// h.Xattrs[key] = value
// h.PAXRecords["SCHILY.xattr."+key] = value
//
// When Writer.WriteHeader is called, the contents of Xattrs will take
// precedence over those in PAXRecords.
//
// Deprecated: Use PAXRecords instead.
Xattrs map[string]string // Go 1.3
// PAXRecords is a map of PAX extended header records.
//
// User-defined records should have keys of the following form:
// VENDOR.keyword
// Where VENDOR is some namespace in all uppercase, and keyword may
// not contain the '=' character (e.g., "GOLANG.pkg.version").
// The key and value should be non-empty UTF-8 strings.
//
// When Writer.WriteHeader is called, PAX records derived from the
// other fields in Header take precedence over PAXRecords.
PAXRecords map[string]string // Go 1.10
// Format specifies the format of the tar header.
//
// This is set by Reader.Next as a best-effort guess at the format.
// Since the Reader liberally reads some non-compliant files,
// it is possible for this to be FormatUnknown.
//
// If the format is unspecified when Writer.WriteHeader is called,
// then it uses the first format (in the order of USTAR, PAX, GNU)
// capable of encoding this Header (see Format).
Format Format // Go 1.10
}
func FileInfoHeader ¶ 1.1
func FileInfoHeader(fi fs.FileInfo, link string) (*Header, error)
FileInfoHeader creates a partially-populated Header from fi. If fi describes a symlink, FileInfoHeader records link as the link target. If fi describes a directory, a slash is appended to the name.
Since fs.FileInfo's Name method only returns the base name of the file it describes, it may be necessary to modify Header.Name to provide the full path name of the file.
If fi implements FileInfoNames Header.Gname and Header.Uname are provided by the methods of the interface.
func (*Header) FileInfo ¶ 1.1
func (h *Header) FileInfo() fs.FileInfo
FileInfo returns an fs.FileInfo for the Header.
type Reader ¶
Reader provides sequential access to the contents of a tar archive. Reader.Next advances to the next file in the archive (including the first), and then Reader can be treated as an io.Reader to access the file's data.
type Reader struct {
// contains filtered or unexported fields
}
func NewReader ¶
func NewReader(r io.Reader) *Reader
NewReader creates a new Reader reading from r.
func (*Reader) Next ¶
func (tr *Reader) Next() (*Header, error)
Next advances to the next entry in the tar archive. The Header.Size determines how many bytes can be read for the next file. Any remaining data in the current file is automatically discarded. At the end of the archive, Next returns the error io.EOF.
If Next encounters a non-local name (as defined by filepath.IsLocal) and the GODEBUG environment variable contains `tarinsecurepath=0`, Next returns the header with an ErrInsecurePath error. A future version of Go may introduce this behavior by default. Programs that want to accept non-local names can ignore the ErrInsecurePath error and use the returned header.
func (*Reader) Read ¶
func (tr *Reader) Read(b []byte) (int, error)
Read reads from the current file in the tar archive. It returns (0, io.EOF) when it reaches the end of that file, until [Next] is called to advance to the next file.
If the current file is sparse, then the regions marked as a hole are read back as NUL-bytes.
Calling Read on special types like TypeLink, TypeSymlink, TypeChar, TypeBlock, TypeDir, and TypeFifo returns (0, io.EOF) regardless of what the [Header.Size] claims.
type Writer ¶
Writer provides sequential writing of a tar archive. Writer.WriteHeader begins a new file with the provided Header, and then Writer can be treated as an io.Writer to supply that file's data.
type Writer struct {
// contains filtered or unexported fields
}
func NewWriter ¶
func NewWriter(w io.Writer) *Writer
NewWriter creates a new Writer writing to w.
func (*Writer) AddFS ¶ 1.22
func (tw *Writer) AddFS(fsys fs.FS) error
AddFS adds the files from fs.FS to the archive. It walks the directory tree starting at the root of the filesystem adding each file to the tar archive while maintaining the directory structure.
func (*Writer) Close ¶
func (tw *Writer) Close() error
Close closes the tar archive by flushing the padding, and writing the footer. If the current file (from a prior call to Writer.WriteHeader) is not fully written, then this returns an error.
func (*Writer) Flush ¶
func (tw *Writer) Flush() error
Flush finishes writing the current file's block padding. The current file must be fully written before Flush can be called.
This is unnecessary as the next call to Writer.WriteHeader or Writer.Close will implicitly flush out the file's padding.
func (*Writer) Write ¶
func (tw *Writer) Write(b []byte) (int, error)
Write writes to the current file in the tar archive. Write returns the error ErrWriteTooLong if more than Header.Size bytes are written after Writer.WriteHeader.
Calling Write on special types like TypeLink, TypeSymlink, TypeChar, TypeBlock, TypeDir, and TypeFifo returns (0, ErrWriteTooLong) regardless of what the [Header.Size] claims.
func (*Writer) WriteHeader ¶
func (tw *Writer) WriteHeader(hdr *Header) error
WriteHeader writes hdr and prepares to accept the file's contents. The Header.Size determines how many bytes can be written for the next file. If the current file is not fully written, then this returns an error. This implicitly flushes any padding necessary before writing the header.