// Copyright 2016 The Go Authors. All rights reserved. // Use of this source code is governed by a BSD-style // license that can be found in the LICENSE file. package ppc64 import ( "cmd/compile/internal/base" "cmd/compile/internal/ir" "cmd/compile/internal/logopt" "cmd/compile/internal/objw" "cmd/compile/internal/ssa" "cmd/compile/internal/ssagen" "cmd/compile/internal/types" "cmd/internal/obj" "cmd/internal/obj/ppc64" "internal/buildcfg" "math" "strings" ) // ssaMarkMoves marks any MOVXconst ops that need to avoid clobbering flags. func ssaMarkMoves(s *ssagen.State, b *ssa.Block) { // flive := b.FlagsLiveAtEnd // if b.Control != nil && b.Control.Type.IsFlags() { // flive = true // } // for i := len(b.Values) - 1; i >= 0; i-- { // v := b.Values[i] // if flive && (v.Op == v.Op == ssa.OpPPC64MOVDconst) { // // The "mark" is any non-nil Aux value. // v.Aux = v // } // if v.Type.IsFlags() { // flive = false // } // for _, a := range v.Args { // if a.Type.IsFlags() { // flive = true // } // } // } } // loadByType returns the load instruction of the given type. func loadByType(t *types.Type) obj.As { if t.IsFloat() { switch t.Size() { case 4: return ppc64.AFMOVS case 8: return ppc64.AFMOVD } } else { switch t.Size() { case 1: if t.IsSigned() { return ppc64.AMOVB } else { return ppc64.AMOVBZ } case 2: if t.IsSigned() { return ppc64.AMOVH } else { return ppc64.AMOVHZ } case 4: if t.IsSigned() { return ppc64.AMOVW } else { return ppc64.AMOVWZ } case 8: return ppc64.AMOVD } } panic("bad load type") } // storeByType returns the store instruction of the given type. func storeByType(t *types.Type) obj.As { if t.IsFloat() { switch t.Size() { case 4: return ppc64.AFMOVS case 8: return ppc64.AFMOVD } } else { switch t.Size() { case 1: return ppc64.AMOVB case 2: return ppc64.AMOVH case 4: return ppc64.AMOVW case 8: return ppc64.AMOVD } } panic("bad store type") } func ssaGenValue(s *ssagen.State, v *ssa.Value) { switch v.Op { case ssa.OpCopy: t := v.Type if t.IsMemory() { return } x := v.Args[0].Reg() y := v.Reg() if x != y { rt := obj.TYPE_REG op := ppc64.AMOVD if t.IsFloat() { op = ppc64.AFMOVD } p := s.Prog(op) p.From.Type = rt p.From.Reg = x p.To.Type = rt p.To.Reg = y } case ssa.OpPPC64LoweredAtomicAnd8, ssa.OpPPC64LoweredAtomicAnd32, ssa.OpPPC64LoweredAtomicOr8, ssa.OpPPC64LoweredAtomicOr32: // LWSYNC // LBAR/LWAR (Rarg0), Rtmp // AND/OR Rarg1, Rtmp // STBCCC/STWCCC Rtmp, (Rarg0) // BNE -3(PC) ld := ppc64.ALBAR st := ppc64.ASTBCCC if v.Op == ssa.OpPPC64LoweredAtomicAnd32 || v.Op == ssa.OpPPC64LoweredAtomicOr32 { ld = ppc64.ALWAR st = ppc64.ASTWCCC } r0 := v.Args[0].Reg() r1 := v.Args[1].Reg() // LWSYNC - Assuming shared data not write-through-required nor // caching-inhibited. See Appendix B.2.2.2 in the ISA 2.07b. plwsync := s.Prog(ppc64.ALWSYNC) plwsync.To.Type = obj.TYPE_NONE // LBAR or LWAR p := s.Prog(ld) p.From.Type = obj.TYPE_MEM p.From.Reg = r0 p.To.Type = obj.TYPE_REG p.To.Reg = ppc64.REGTMP // AND/OR reg1,out p1 := s.Prog(v.Op.Asm()) p1.From.Type = obj.TYPE_REG p1.From.Reg = r1 p1.To.Type = obj.TYPE_REG p1.To.Reg = ppc64.REGTMP // STBCCC or STWCCC p2 := s.Prog(st) p2.From.Type = obj.TYPE_REG p2.From.Reg = ppc64.REGTMP p2.To.Type = obj.TYPE_MEM p2.To.Reg = r0 p2.RegTo2 = ppc64.REGTMP // BNE retry p3 := s.Prog(ppc64.ABNE) p3.To.Type = obj.TYPE_BRANCH p3.To.SetTarget(p) case ssa.OpPPC64LoweredAtomicAdd32, ssa.OpPPC64LoweredAtomicAdd64: // LWSYNC // LDAR/LWAR (Rarg0), Rout // ADD Rarg1, Rout // STDCCC/STWCCC Rout, (Rarg0) // BNE -3(PC) // MOVW Rout,Rout (if Add32) ld := ppc64.ALDAR st := ppc64.ASTDCCC if v.Op == ssa.OpPPC64LoweredAtomicAdd32 { ld = ppc64.ALWAR st = ppc64.ASTWCCC } r0 := v.Args[0].Reg() r1 := v.Args[1].Reg() out := v.Reg0() // LWSYNC - Assuming shared data not write-through-required nor // caching-inhibited. See Appendix B.2.2.2 in the ISA 2.07b. plwsync := s.Prog(ppc64.ALWSYNC) plwsync.To.Type = obj.TYPE_NONE // LDAR or LWAR p := s.Prog(ld) p.From.Type = obj.TYPE_MEM p.From.Reg = r0 p.To.Type = obj.TYPE_REG p.To.Reg = out // ADD reg1,out p1 := s.Prog(ppc64.AADD) p1.From.Type = obj.TYPE_REG p1.From.Reg = r1 p1.To.Reg = out p1.To.Type = obj.TYPE_REG // STDCCC or STWCCC p3 := s.Prog(st) p3.From.Type = obj.TYPE_REG p3.From.Reg = out p3.To.Type = obj.TYPE_MEM p3.To.Reg = r0 // BNE retry p4 := s.Prog(ppc64.ABNE) p4.To.Type = obj.TYPE_BRANCH p4.To.SetTarget(p) // Ensure a 32 bit result if v.Op == ssa.OpPPC64LoweredAtomicAdd32 { p5 := s.Prog(ppc64.AMOVWZ) p5.To.Type = obj.TYPE_REG p5.To.Reg = out p5.From.Type = obj.TYPE_REG p5.From.Reg = out } case ssa.OpPPC64LoweredAtomicExchange8, ssa.OpPPC64LoweredAtomicExchange32, ssa.OpPPC64LoweredAtomicExchange64: // LWSYNC // LDAR/LWAR/LBAR (Rarg0), Rout // STDCCC/STWCCC/STBWCCC Rout, (Rarg0) // BNE -2(PC) // ISYNC ld := ppc64.ALDAR st := ppc64.ASTDCCC switch v.Op { case ssa.OpPPC64LoweredAtomicExchange8: ld = ppc64.ALBAR st = ppc64.ASTBCCC case ssa.OpPPC64LoweredAtomicExchange32: ld = ppc64.ALWAR st = ppc64.ASTWCCC } r0 := v.Args[0].Reg() r1 := v.Args[1].Reg() out := v.Reg0() // LWSYNC - Assuming shared data not write-through-required nor // caching-inhibited. See Appendix B.2.2.2 in the ISA 2.07b. plwsync := s.Prog(ppc64.ALWSYNC) plwsync.To.Type = obj.TYPE_NONE // L[B|W|D]AR p := s.Prog(ld) p.From.Type = obj.TYPE_MEM p.From.Reg = r0 p.To.Type = obj.TYPE_REG p.To.Reg = out // ST[B|W|D]CCC p1 := s.Prog(st) p1.From.Type = obj.TYPE_REG p1.From.Reg = r1 p1.To.Type = obj.TYPE_MEM p1.To.Reg = r0 // BNE retry p2 := s.Prog(ppc64.ABNE) p2.To.Type = obj.TYPE_BRANCH p2.To.SetTarget(p) // ISYNC pisync := s.Prog(ppc64.AISYNC) pisync.To.Type = obj.TYPE_NONE case ssa.OpPPC64LoweredAtomicLoad8, ssa.OpPPC64LoweredAtomicLoad32, ssa.OpPPC64LoweredAtomicLoad64, ssa.OpPPC64LoweredAtomicLoadPtr: // SYNC // MOVB/MOVD/MOVW (Rarg0), Rout // CMP Rout,Rout // BNE 1(PC) // ISYNC ld := ppc64.AMOVD cmp := ppc64.ACMP switch v.Op { case ssa.OpPPC64LoweredAtomicLoad8: ld = ppc64.AMOVBZ case ssa.OpPPC64LoweredAtomicLoad32: ld = ppc64.AMOVWZ cmp = ppc64.ACMPW } arg0 := v.Args[0].Reg() out := v.Reg0() // SYNC when AuxInt == 1; otherwise, load-acquire if v.AuxInt == 1 { psync := s.Prog(ppc64.ASYNC) psync.To.Type = obj.TYPE_NONE } // Load p := s.Prog(ld) p.From.Type = obj.TYPE_MEM p.From.Reg = arg0 p.To.Type = obj.TYPE_REG p.To.Reg = out // CMP p1 := s.Prog(cmp) p1.From.Type = obj.TYPE_REG p1.From.Reg = out p1.To.Type = obj.TYPE_REG p1.To.Reg = out // BNE p2 := s.Prog(ppc64.ABNE) p2.To.Type = obj.TYPE_BRANCH // ISYNC pisync := s.Prog(ppc64.AISYNC) pisync.To.Type = obj.TYPE_NONE p2.To.SetTarget(pisync) case ssa.OpPPC64LoweredAtomicStore8, ssa.OpPPC64LoweredAtomicStore32, ssa.OpPPC64LoweredAtomicStore64: // SYNC or LWSYNC // MOVB/MOVW/MOVD arg1,(arg0) st := ppc64.AMOVD switch v.Op { case ssa.OpPPC64LoweredAtomicStore8: st = ppc64.AMOVB case ssa.OpPPC64LoweredAtomicStore32: st = ppc64.AMOVW } arg0 := v.Args[0].Reg() arg1 := v.Args[1].Reg() // If AuxInt == 0, LWSYNC (Store-Release), else SYNC // SYNC syncOp := ppc64.ASYNC if v.AuxInt == 0 { syncOp = ppc64.ALWSYNC } psync := s.Prog(syncOp) psync.To.Type = obj.TYPE_NONE // Store p := s.Prog(st) p.To.Type = obj.TYPE_MEM p.To.Reg = arg0 p.From.Type = obj.TYPE_REG p.From.Reg = arg1 case ssa.OpPPC64LoweredAtomicCas64, ssa.OpPPC64LoweredAtomicCas32: // MOVD $0, Rout // LWSYNC // loop: // LDAR (Rarg0), MutexHint, Rtmp // CMP Rarg1, Rtmp // BNE end // STDCCC Rarg2, (Rarg0) // BNE loop // MOVD $1, Rout // end: // LWSYNC // Only for sequential consistency; not required in CasRel. ld := ppc64.ALDAR st := ppc64.ASTDCCC cmp := ppc64.ACMP if v.Op == ssa.OpPPC64LoweredAtomicCas32 { ld = ppc64.ALWAR st = ppc64.ASTWCCC cmp = ppc64.ACMPW } r0 := v.Args[0].Reg() r1 := v.Args[1].Reg() r2 := v.Args[2].Reg() out := v.Reg0() // Initialize return value to false p := s.Prog(ppc64.AMOVD) p.From.Type = obj.TYPE_CONST p.From.Offset = 0 p.To.Type = obj.TYPE_REG p.To.Reg = out // LWSYNC - Assuming shared data not write-through-required nor // caching-inhibited. See Appendix B.2.2.2 in the ISA 2.07b. plwsync1 := s.Prog(ppc64.ALWSYNC) plwsync1.To.Type = obj.TYPE_NONE // LDAR or LWAR p0 := s.Prog(ld) p0.From.Type = obj.TYPE_MEM p0.From.Reg = r0 p0.To.Type = obj.TYPE_REG p0.To.Reg = ppc64.REGTMP // If it is a Compare-and-Swap-Release operation, set the EH field with // the release hint. if v.AuxInt == 0 { p0.AddRestSourceConst(0) } // CMP reg1,reg2 p1 := s.Prog(cmp) p1.From.Type = obj.TYPE_REG p1.From.Reg = r1 p1.To.Reg = ppc64.REGTMP p1.To.Type = obj.TYPE_REG // BNE done with return value = false p2 := s.Prog(ppc64.ABNE) p2.To.Type = obj.TYPE_BRANCH // STDCCC or STWCCC p3 := s.Prog(st) p3.From.Type = obj.TYPE_REG p3.From.Reg = r2 p3.To.Type = obj.TYPE_MEM p3.To.Reg = r0 // BNE retry p4 := s.Prog(ppc64.ABNE) p4.To.Type = obj.TYPE_BRANCH p4.To.SetTarget(p0) // return value true p5 := s.Prog(ppc64.AMOVD) p5.From.Type = obj.TYPE_CONST p5.From.Offset = 1 p5.To.Type = obj.TYPE_REG p5.To.Reg = out // LWSYNC - Assuming shared data not write-through-required nor // caching-inhibited. See Appendix B.2.1.1 in the ISA 2.07b. // If the operation is a CAS-Release, then synchronization is not necessary. if v.AuxInt != 0 { plwsync2 := s.Prog(ppc64.ALWSYNC) plwsync2.To.Type = obj.TYPE_NONE p2.To.SetTarget(plwsync2) } else { // done (label) p6 := s.Prog(obj.ANOP) p2.To.SetTarget(p6) } case ssa.OpPPC64LoweredPubBarrier: // LWSYNC s.Prog(v.Op.Asm()) case ssa.OpPPC64LoweredGetClosurePtr: // Closure pointer is R11 (already) ssagen.CheckLoweredGetClosurePtr(v) case ssa.OpPPC64LoweredGetCallerSP: // caller's SP is FixedFrameSize below the address of the first arg p := s.Prog(ppc64.AMOVD) p.From.Type = obj.TYPE_ADDR p.From.Offset = -base.Ctxt.Arch.FixedFrameSize p.From.Name = obj.NAME_PARAM p.To.Type = obj.TYPE_REG p.To.Reg = v.Reg() case ssa.OpPPC64LoweredGetCallerPC: p := s.Prog(obj.AGETCALLERPC) p.To.Type = obj.TYPE_REG p.To.Reg = v.Reg() case ssa.OpPPC64LoweredRound32F, ssa.OpPPC64LoweredRound64F: // input is already rounded case ssa.OpLoadReg: loadOp := loadByType(v.Type) p := s.Prog(loadOp) ssagen.AddrAuto(&p.From, v.Args[0]) p.To.Type = obj.TYPE_REG p.To.Reg = v.Reg() case ssa.OpStoreReg: storeOp := storeByType(v.Type) p := s.Prog(storeOp) p.From.Type = obj.TYPE_REG p.From.Reg = v.Args[0].Reg() ssagen.AddrAuto(&p.To, v) case ssa.OpArgIntReg, ssa.OpArgFloatReg: // The assembler needs to wrap the entry safepoint/stack growth code with spill/unspill // The loop only runs once. for _, a := range v.Block.Func.RegArgs { // Pass the spill/unspill information along to the assembler, offset by size of // the saved LR slot. addr := ssagen.SpillSlotAddr(a, ppc64.REGSP, base.Ctxt.Arch.FixedFrameSize) s.FuncInfo().AddSpill( obj.RegSpill{Reg: a.Reg, Addr: addr, Unspill: loadByType(a.Type), Spill: storeByType(a.Type)}) } v.Block.Func.RegArgs = nil ssagen.CheckArgReg(v) case ssa.OpPPC64DIVD: // For now, // // cmp arg1, -1 // be ahead // v = arg0 / arg1 // b over // ahead: v = - arg0 // over: nop r := v.Reg() r0 := v.Args[0].Reg() r1 := v.Args[1].Reg() p := s.Prog(ppc64.ACMP) p.From.Type = obj.TYPE_REG p.From.Reg = r1 p.To.Type = obj.TYPE_CONST p.To.Offset = -1 pbahead := s.Prog(ppc64.ABEQ) pbahead.To.Type = obj.TYPE_BRANCH p = s.Prog(v.Op.Asm()) p.From.Type = obj.TYPE_REG p.From.Reg = r1 p.Reg = r0 p.To.Type = obj.TYPE_REG p.To.Reg = r pbover := s.Prog(obj.AJMP) pbover.To.Type = obj.TYPE_BRANCH p = s.Prog(ppc64.ANEG) p.To.Type = obj.TYPE_REG p.To.Reg = r p.From.Type = obj.TYPE_REG p.From.Reg = r0 pbahead.To.SetTarget(p) p = s.Prog(obj.ANOP) pbover.To.SetTarget(p) case ssa.OpPPC64DIVW: // word-width version of above r := v.Reg() r0 := v.Args[0].Reg() r1 := v.Args[1].Reg() p := s.Prog(ppc64.ACMPW) p.From.Type = obj.TYPE_REG p.From.Reg = r1 p.To.Type = obj.TYPE_CONST p.To.Offset = -1 pbahead := s.Prog(ppc64.ABEQ) pbahead.To.Type = obj.TYPE_BRANCH p = s.Prog(v.Op.Asm()) p.From.Type = obj.TYPE_REG p.From.Reg = r1 p.Reg = r0 p.To.Type = obj.TYPE_REG p.To.Reg = r pbover := s.Prog(obj.AJMP) pbover.To.Type = obj.TYPE_BRANCH p = s.Prog(ppc64.ANEG) p.To.Type = obj.TYPE_REG p.To.Reg = r p.From.Type = obj.TYPE_REG p.From.Reg = r0 pbahead.To.SetTarget(p) p = s.Prog(obj.ANOP) pbover.To.SetTarget(p) case ssa.OpPPC64CLRLSLWI: r := v.Reg() r1 := v.Args[0].Reg() shifts := v.AuxInt p := s.Prog(v.Op.Asm()) // clrlslwi ra,rs,mb,sh will become rlwinm ra,rs,sh,mb-sh,31-sh as described in ISA p.From = obj.Addr{Type: obj.TYPE_CONST, Offset: ssa.GetPPC64Shiftmb(shifts)} p.AddRestSourceConst(ssa.GetPPC64Shiftsh(shifts)) p.Reg = r1 p.To.Type = obj.TYPE_REG p.To.Reg = r case ssa.OpPPC64CLRLSLDI: r := v.Reg() r1 := v.Args[0].Reg() shifts := v.AuxInt p := s.Prog(v.Op.Asm()) // clrlsldi ra,rs,mb,sh will become rldic ra,rs,sh,mb-sh p.From = obj.Addr{Type: obj.TYPE_CONST, Offset: ssa.GetPPC64Shiftmb(shifts)} p.AddRestSourceConst(ssa.GetPPC64Shiftsh(shifts)) p.Reg = r1 p.To.Type = obj.TYPE_REG p.To.Reg = r case ssa.OpPPC64ADD, ssa.OpPPC64FADD, ssa.OpPPC64FADDS, ssa.OpPPC64SUB, ssa.OpPPC64FSUB, ssa.OpPPC64FSUBS, ssa.OpPPC64MULLD, ssa.OpPPC64MULLW, ssa.OpPPC64DIVDU, ssa.OpPPC64DIVWU, ssa.OpPPC64SRAD, ssa.OpPPC64SRAW, ssa.OpPPC64SRD, ssa.OpPPC64SRW, ssa.OpPPC64SLD, ssa.OpPPC64SLW, ssa.OpPPC64ROTL, ssa.OpPPC64ROTLW, ssa.OpPPC64MULHD, ssa.OpPPC64MULHW, ssa.OpPPC64MULHDU, ssa.OpPPC64MULHWU, ssa.OpPPC64FMUL, ssa.OpPPC64FMULS, ssa.OpPPC64FDIV, ssa.OpPPC64FDIVS, ssa.OpPPC64FCPSGN, ssa.OpPPC64AND, ssa.OpPPC64OR, ssa.OpPPC64ANDN, ssa.OpPPC64ORN, ssa.OpPPC64NOR, ssa.OpPPC64XOR, ssa.OpPPC64EQV, ssa.OpPPC64MODUD, ssa.OpPPC64MODSD, ssa.OpPPC64MODUW, ssa.OpPPC64MODSW, ssa.OpPPC64XSMINJDP, ssa.OpPPC64XSMAXJDP: r := v.Reg() r1 := v.Args[0].Reg() r2 := v.Args[1].Reg() p := s.Prog(v.Op.Asm()) p.From.Type = obj.TYPE_REG p.From.Reg = r2 p.Reg = r1 p.To.Type = obj.TYPE_REG p.To.Reg = r case ssa.OpPPC64ADDCC, ssa.OpPPC64ANDCC, ssa.OpPPC64SUBCC, ssa.OpPPC64ORCC, ssa.OpPPC64XORCC, ssa.OpPPC64NORCC, ssa.OpPPC64ANDNCC, ssa.OpPPC64MULHDUCC: r1 := v.Args[0].Reg() r2 := v.Args[1].Reg() p := s.Prog(v.Op.Asm()) p.From.Type = obj.TYPE_REG p.From.Reg = r2 p.Reg = r1 p.To.Type = obj.TYPE_REG p.To.Reg = v.Reg0() case ssa.OpPPC64NEGCC, ssa.OpPPC64CNTLZDCC: p := s.Prog(v.Op.Asm()) p.To.Type = obj.TYPE_REG p.To.Reg = v.Reg0() p.From.Type = obj.TYPE_REG p.From.Reg = v.Args[0].Reg() case ssa.OpPPC64ROTLconst, ssa.OpPPC64ROTLWconst: p := s.Prog(v.Op.Asm()) p.From.Type = obj.TYPE_CONST p.From.Offset = v.AuxInt p.Reg = v.Args[0].Reg() p.To.Type = obj.TYPE_REG p.To.Reg = v.Reg() // Auxint holds encoded rotate + mask case ssa.OpPPC64RLWINM, ssa.OpPPC64RLWMI: sh, mb, me, _ := ssa.DecodePPC64RotateMask(v.AuxInt) p := s.Prog(v.Op.Asm()) p.To = obj.Addr{Type: obj.TYPE_REG, Reg: v.Reg()} p.Reg = v.Args[0].Reg() p.From = obj.Addr{Type: obj.TYPE_CONST, Offset: int64(sh)} p.AddRestSourceArgs([]obj.Addr{{Type: obj.TYPE_CONST, Offset: mb}, {Type: obj.TYPE_CONST, Offset: me}}) // Auxint holds mask case ssa.OpPPC64RLDICL, ssa.OpPPC64RLDICLCC, ssa.OpPPC64RLDICR: sh, mb, me, _ := ssa.DecodePPC64RotateMask(v.AuxInt) p := s.Prog(v.Op.Asm()) p.From = obj.Addr{Type: obj.TYPE_CONST, Offset: sh} switch v.Op { case ssa.OpPPC64RLDICL, ssa.OpPPC64RLDICLCC: p.AddRestSourceConst(mb) case ssa.OpPPC64RLDICR: p.AddRestSourceConst(me) } p.Reg = v.Args[0].Reg() p.To = obj.Addr{Type: obj.TYPE_REG, Reg: v.ResultReg()} case ssa.OpPPC64RLWNM: _, mb, me, _ := ssa.DecodePPC64RotateMask(v.AuxInt) p := s.Prog(v.Op.Asm()) p.To = obj.Addr{Type: obj.TYPE_REG, Reg: v.Reg()} p.Reg = v.Args[0].Reg() p.From = obj.Addr{Type: obj.TYPE_REG, Reg: v.Args[1].Reg()} p.AddRestSourceArgs([]obj.Addr{{Type: obj.TYPE_CONST, Offset: mb}, {Type: obj.TYPE_CONST, Offset: me}}) case ssa.OpPPC64MADDLD: r := v.Reg() r1 := v.Args[0].Reg() r2 := v.Args[1].Reg() r3 := v.Args[2].Reg() // r = r1*r2 ± r3 p := s.Prog(v.Op.Asm()) p.From.Type = obj.TYPE_REG p.From.Reg = r1 p.Reg = r2 p.AddRestSourceReg(r3) p.To.Type = obj.TYPE_REG p.To.Reg = r case ssa.OpPPC64FMADD, ssa.OpPPC64FMADDS, ssa.OpPPC64FMSUB, ssa.OpPPC64FMSUBS: r := v.Reg() r1 := v.Args[0].Reg() r2 := v.Args[1].Reg() r3 := v.Args[2].Reg() // r = r1*r2 ± r3 p := s.Prog(v.Op.Asm()) p.From.Type = obj.TYPE_REG p.From.Reg = r1 p.Reg = r3 p.AddRestSourceReg(r2) p.To.Type = obj.TYPE_REG p.To.Reg = r case ssa.OpPPC64NEG, ssa.OpPPC64FNEG, ssa.OpPPC64FSQRT, ssa.OpPPC64FSQRTS, ssa.OpPPC64FFLOOR, ssa.OpPPC64FTRUNC, ssa.OpPPC64FCEIL, ssa.OpPPC64FCTIDZ, ssa.OpPPC64FCTIWZ, ssa.OpPPC64FCFID, ssa.OpPPC64FCFIDS, ssa.OpPPC64FRSP, ssa.OpPPC64CNTLZD, ssa.OpPPC64CNTLZW, ssa.OpPPC64POPCNTD, ssa.OpPPC64POPCNTW, ssa.OpPPC64POPCNTB, ssa.OpPPC64MFVSRD, ssa.OpPPC64MTVSRD, ssa.OpPPC64FABS, ssa.OpPPC64FNABS, ssa.OpPPC64FROUND, ssa.OpPPC64CNTTZW, ssa.OpPPC64CNTTZD, ssa.OpPPC64BRH, ssa.OpPPC64BRW, ssa.OpPPC64BRD: r := v.Reg() p := s.Prog(v.Op.Asm()) p.To.Type = obj.TYPE_REG p.To.Reg = r p.From.Type = obj.TYPE_REG p.From.Reg = v.Args[0].Reg() case ssa.OpPPC64ADDconst, ssa.OpPPC64ORconst, ssa.OpPPC64XORconst, ssa.OpPPC64SRADconst, ssa.OpPPC64SRAWconst, ssa.OpPPC64SRDconst, ssa.OpPPC64SRWconst, ssa.OpPPC64SLDconst, ssa.OpPPC64SLWconst, ssa.OpPPC64EXTSWSLconst, ssa.OpPPC64MULLWconst, ssa.OpPPC64MULLDconst, ssa.OpPPC64ANDconst: p := s.Prog(v.Op.Asm()) p.Reg = v.Args[0].Reg() p.From.Type = obj.TYPE_CONST p.From.Offset = v.AuxInt p.To.Type = obj.TYPE_REG p.To.Reg = v.Reg() case ssa.OpPPC64ADDC, ssa.OpPPC64ADDE, ssa.OpPPC64SUBC, ssa.OpPPC64SUBE: r := v.Reg0() // CA is the first, implied argument. r1 := v.Args[0].Reg() r2 := v.Args[1].Reg() p := s.Prog(v.Op.Asm()) p.From.Type = obj.TYPE_REG p.From.Reg = r2 p.Reg = r1 p.To.Type = obj.TYPE_REG p.To.Reg = r case ssa.OpPPC64ADDZE: p := s.Prog(v.Op.Asm()) p.From.Type = obj.TYPE_REG p.From.Reg = v.Args[0].Reg() p.To.Type = obj.TYPE_REG p.To.Reg = v.Reg0() case ssa.OpPPC64ADDZEzero, ssa.OpPPC64SUBZEzero: p := s.Prog(v.Op.Asm()) p.From.Type = obj.TYPE_REG p.From.Reg = ppc64.REG_R0 p.To.Type = obj.TYPE_REG p.To.Reg = v.Reg() case ssa.OpPPC64ADDCconst: p := s.Prog(v.Op.Asm()) p.Reg = v.Args[0].Reg() p.From.Type = obj.TYPE_CONST p.From.Offset = v.AuxInt p.To.Type = obj.TYPE_REG // Output is a pair, the second is the CA, which is implied. p.To.Reg = v.Reg0() case ssa.OpPPC64SUBCconst: p := s.Prog(v.Op.Asm()) p.AddRestSourceConst(v.AuxInt) p.From.Type = obj.TYPE_REG p.From.Reg = v.Args[0].Reg() p.To.Type = obj.TYPE_REG p.To.Reg = v.Reg0() case ssa.OpPPC64SUBFCconst: p := s.Prog(v.Op.Asm()) p.AddRestSourceConst(v.AuxInt) p.From.Type = obj.TYPE_REG p.From.Reg = v.Args[0].Reg() p.To.Type = obj.TYPE_REG p.To.Reg = v.Reg() case ssa.OpPPC64ADDCCconst, ssa.OpPPC64ANDCCconst: p := s.Prog(v.Op.Asm()) p.Reg = v.Args[0].Reg() p.From.Type = obj.TYPE_CONST p.From.Offset = v.AuxInt p.To.Type = obj.TYPE_REG p.To.Reg = v.Reg0() case ssa.OpPPC64MOVDaddr: switch v.Aux.(type) { default: v.Fatalf("aux in MOVDaddr is of unknown type %T", v.Aux) case nil: // If aux offset and aux int are both 0, and the same // input and output regs are used, no instruction // needs to be generated, since it would just be // addi rx, rx, 0. if v.AuxInt != 0 || v.Args[0].Reg() != v.Reg() { p := s.Prog(ppc64.AMOVD) p.From.Type = obj.TYPE_ADDR p.From.Reg = v.Args[0].Reg() p.From.Offset = v.AuxInt p.To.Type = obj.TYPE_REG p.To.Reg = v.Reg() } case *obj.LSym, ir.Node: p := s.Prog(ppc64.AMOVD) p.From.Type = obj.TYPE_ADDR p.From.Reg = v.Args[0].Reg() p.To.Type = obj.TYPE_REG p.To.Reg = v.Reg() ssagen.AddAux(&p.From, v) } case ssa.OpPPC64MOVDconst: p := s.Prog(v.Op.Asm()) p.From.Type = obj.TYPE_CONST p.From.Offset = v.AuxInt p.To.Type = obj.TYPE_REG p.To.Reg = v.Reg() case ssa.OpPPC64FMOVDconst, ssa.OpPPC64FMOVSconst: p := s.Prog(v.Op.Asm()) p.From.Type = obj.TYPE_FCONST p.From.Val = math.Float64frombits(uint64(v.AuxInt)) p.To.Type = obj.TYPE_REG p.To.Reg = v.Reg() case ssa.OpPPC64FCMPU, ssa.OpPPC64CMP, ssa.OpPPC64CMPW, ssa.OpPPC64CMPU, ssa.OpPPC64CMPWU: p := s.Prog(v.Op.Asm()) p.From.Type = obj.TYPE_REG p.From.Reg = v.Args[0].Reg() p.To.Type = obj.TYPE_REG p.To.Reg = v.Args[1].Reg() case ssa.OpPPC64CMPconst, ssa.OpPPC64CMPUconst, ssa.OpPPC64CMPWconst, ssa.OpPPC64CMPWUconst: p := s.Prog(v.Op.Asm()) p.From.Type = obj.TYPE_REG p.From.Reg = v.Args[0].Reg() p.To.Type = obj.TYPE_CONST p.To.Offset = v.AuxInt case ssa.OpPPC64MOVBreg, ssa.OpPPC64MOVBZreg, ssa.OpPPC64MOVHreg, ssa.OpPPC64MOVHZreg, ssa.OpPPC64MOVWreg, ssa.OpPPC64MOVWZreg: // Shift in register to required size p := s.Prog(v.Op.Asm()) p.From.Type = obj.TYPE_REG p.From.Reg = v.Args[0].Reg() p.To.Reg = v.Reg() p.To.Type = obj.TYPE_REG case ssa.OpPPC64MOVDload, ssa.OpPPC64MOVWload: // MOVDload and MOVWload are DS form instructions that are restricted to // offsets that are a multiple of 4. If the offset is not a multiple of 4, // then the address of the symbol to be loaded is computed (base + offset) // and used as the new base register and the offset field in the instruction // can be set to zero. // This same problem can happen with gostrings since the final offset is not // known yet, but could be unaligned after the relocation is resolved. // So gostrings are handled the same way. // This allows the MOVDload and MOVWload to be generated in more cases and // eliminates some offset and alignment checking in the rules file. fromAddr := obj.Addr{Type: obj.TYPE_MEM, Reg: v.Args[0].Reg()} ssagen.AddAux(&fromAddr, v) genAddr := false switch fromAddr.Name { case obj.NAME_EXTERN, obj.NAME_STATIC: // Special case for a rule combines the bytes of gostring. // The v alignment might seem OK, but we don't want to load it // using an offset because relocation comes later. genAddr = strings.HasPrefix(fromAddr.Sym.Name, "go:string") || v.Type.Alignment()%4 != 0 || fromAddr.Offset%4 != 0 default: genAddr = fromAddr.Offset%4 != 0 } if genAddr { // Load full address into the temp register. p := s.Prog(ppc64.AMOVD) p.From.Type = obj.TYPE_ADDR p.From.Reg = v.Args[0].Reg() ssagen.AddAux(&p.From, v) // Load target using temp as base register // and offset zero. Setting NAME_NONE // prevents any extra offsets from being // added. p.To.Type = obj.TYPE_REG p.To.Reg = ppc64.REGTMP fromAddr.Reg = ppc64.REGTMP // Clear the offset field and other // information that might be used // by the assembler to add to the // final offset value. fromAddr.Offset = 0 fromAddr.Name = obj.NAME_NONE fromAddr.Sym = nil } p := s.Prog(v.Op.Asm()) p.From = fromAddr p.To.Type = obj.TYPE_REG p.To.Reg = v.Reg() case ssa.OpPPC64MOVHload, ssa.OpPPC64MOVWZload, ssa.OpPPC64MOVBZload, ssa.OpPPC64MOVHZload, ssa.OpPPC64FMOVDload, ssa.OpPPC64FMOVSload: p := s.Prog(v.Op.Asm()) p.From.Type = obj.TYPE_MEM p.From.Reg = v.Args[0].Reg() ssagen.AddAux(&p.From, v) p.To.Type = obj.TYPE_REG p.To.Reg = v.Reg() case ssa.OpPPC64MOVDBRload, ssa.OpPPC64MOVWBRload, ssa.OpPPC64MOVHBRload: p := s.Prog(v.Op.Asm()) p.From.Type = obj.TYPE_MEM p.From.Reg = v.Args[0].Reg() p.To.Type = obj.TYPE_REG p.To.Reg = v.Reg() case ssa.OpPPC64MOVDBRstore, ssa.OpPPC64MOVWBRstore, ssa.OpPPC64MOVHBRstore: p := s.Prog(v.Op.Asm()) p.To.Type = obj.TYPE_MEM p.To.Reg = v.Args[0].Reg() p.From.Type = obj.TYPE_REG p.From.Reg = v.Args[1].Reg() case ssa.OpPPC64MOVDloadidx, ssa.OpPPC64MOVWloadidx, ssa.OpPPC64MOVHloadidx, ssa.OpPPC64MOVWZloadidx, ssa.OpPPC64MOVBZloadidx, ssa.OpPPC64MOVHZloadidx, ssa.OpPPC64FMOVDloadidx, ssa.OpPPC64FMOVSloadidx, ssa.OpPPC64MOVDBRloadidx, ssa.OpPPC64MOVWBRloadidx, ssa.OpPPC64MOVHBRloadidx: p := s.Prog(v.Op.Asm()) p.From.Type = obj.TYPE_MEM p.From.Reg = v.Args[0].Reg() p.From.Index = v.Args[1].Reg() p.To.Type = obj.TYPE_REG p.To.Reg = v.Reg() case ssa.OpPPC64DCBT: p := s.Prog(v.Op.Asm()) p.From.Type = obj.TYPE_MEM p.From.Reg = v.Args[0].Reg() p.To.Type = obj.TYPE_CONST p.To.Offset = v.AuxInt case ssa.OpPPC64MOVWstorezero, ssa.OpPPC64MOVHstorezero, ssa.OpPPC64MOVBstorezero: p := s.Prog(v.Op.Asm()) p.From.Type = obj.TYPE_REG p.From.Reg = ppc64.REGZERO p.To.Type = obj.TYPE_MEM p.To.Reg = v.Args[0].Reg() ssagen.AddAux(&p.To, v) case ssa.OpPPC64MOVDstore, ssa.OpPPC64MOVDstorezero: // MOVDstore and MOVDstorezero become DS form instructions that are restricted // to offset values that are a multiple of 4. If the offset field is not a // multiple of 4, then the full address of the store target is computed (base + // offset) and used as the new base register and the offset in the instruction // is set to 0. // This allows the MOVDstore and MOVDstorezero to be generated in more cases, // and prevents checking of the offset value and alignment in the rules. toAddr := obj.Addr{Type: obj.TYPE_MEM, Reg: v.Args[0].Reg()} ssagen.AddAux(&toAddr, v) if toAddr.Offset%4 != 0 { p := s.Prog(ppc64.AMOVD) p.From.Type = obj.TYPE_ADDR p.From.Reg = v.Args[0].Reg() ssagen.AddAux(&p.From, v) p.To.Type = obj.TYPE_REG p.To.Reg = ppc64.REGTMP toAddr.Reg = ppc64.REGTMP // Clear the offset field and other // information that might be used // by the assembler to add to the // final offset value. toAddr.Offset = 0 toAddr.Name = obj.NAME_NONE toAddr.Sym = nil } p := s.Prog(v.Op.Asm()) p.To = toAddr p.From.Type = obj.TYPE_REG if v.Op == ssa.OpPPC64MOVDstorezero { p.From.Reg = ppc64.REGZERO } else { p.From.Reg = v.Args[1].Reg() } case ssa.OpPPC64MOVWstore, ssa.OpPPC64MOVHstore, ssa.OpPPC64MOVBstore, ssa.OpPPC64FMOVDstore, ssa.OpPPC64FMOVSstore: p := s.Prog(v.Op.Asm()) p.From.Type = obj.TYPE_REG p.From.Reg = v.Args[1].Reg() p.To.Type = obj.TYPE_MEM p.To.Reg = v.Args[0].Reg() ssagen.AddAux(&p.To, v) case ssa.OpPPC64MOVDstoreidx, ssa.OpPPC64MOVWstoreidx, ssa.OpPPC64MOVHstoreidx, ssa.OpPPC64MOVBstoreidx, ssa.OpPPC64FMOVDstoreidx, ssa.OpPPC64FMOVSstoreidx, ssa.OpPPC64MOVDBRstoreidx, ssa.OpPPC64MOVWBRstoreidx, ssa.OpPPC64MOVHBRstoreidx: p := s.Prog(v.Op.Asm()) p.From.Type = obj.TYPE_REG p.From.Reg = v.Args[2].Reg() p.To.Index = v.Args[1].Reg() p.To.Type = obj.TYPE_MEM p.To.Reg = v.Args[0].Reg() case ssa.OpPPC64ISEL, ssa.OpPPC64ISELZ: // ISEL AuxInt ? arg0 : arg1 // ISELZ is a special case of ISEL where arg1 is implicitly $0. // // AuxInt value indicates conditions 0=LT 1=GT 2=EQ 3=SO 4=GE 5=LE 6=NE 7=NSO. // ISEL accepts a CR bit argument, not a condition as expressed by AuxInt. // Convert the condition to a CR bit argument by the following conversion: // // AuxInt&3 ? arg0 : arg1 for conditions LT, GT, EQ, SO // AuxInt&3 ? arg1 : arg0 for conditions GE, LE, NE, NSO p := s.Prog(v.Op.Asm()) p.To = obj.Addr{Type: obj.TYPE_REG, Reg: v.Reg()} p.Reg = v.Args[0].Reg() if v.Op == ssa.OpPPC64ISEL { p.AddRestSourceReg(v.Args[1].Reg()) } else { p.AddRestSourceReg(ppc64.REG_R0) } // AuxInt values 4,5,6 implemented with reverse operand order from 0,1,2 if v.AuxInt > 3 { p.Reg, p.GetFrom3().Reg = p.GetFrom3().Reg, p.Reg } p.From.SetConst(v.AuxInt & 3) case ssa.OpPPC64SETBC, ssa.OpPPC64SETBCR: p := s.Prog(v.Op.Asm()) p.To.Type = obj.TYPE_REG p.To.Reg = v.Reg() p.From.Type = obj.TYPE_REG p.From.Reg = int16(ppc64.REG_CR0LT + v.AuxInt) case ssa.OpPPC64LoweredQuadZero, ssa.OpPPC64LoweredQuadZeroShort: // The LoweredQuad code generation // generates STXV instructions on // power9. The Short variation is used // if no loop is generated. // sizes >= 64 generate a loop as follows: // Set up loop counter in CTR, used by BC // XXLXOR clears VS32 // XXLXOR VS32,VS32,VS32 // MOVD len/64,REG_TMP // MOVD REG_TMP,CTR // loop: // STXV VS32,0(R20) // STXV VS32,16(R20) // STXV VS32,32(R20) // STXV VS32,48(R20) // ADD $64,R20 // BC 16, 0, loop // Bytes per iteration ctr := v.AuxInt / 64 // Remainder bytes rem := v.AuxInt % 64 // Only generate a loop if there is more // than 1 iteration. if ctr > 1 { // Set up VS32 (V0) to hold 0s p := s.Prog(ppc64.AXXLXOR) p.From.Type = obj.TYPE_REG p.From.Reg = ppc64.REG_VS32 p.To.Type = obj.TYPE_REG p.To.Reg = ppc64.REG_VS32 p.Reg = ppc64.REG_VS32 // Set up CTR loop counter p = s.Prog(ppc64.AMOVD) p.From.Type = obj.TYPE_CONST p.From.Offset = ctr p.To.Type = obj.TYPE_REG p.To.Reg = ppc64.REGTMP p = s.Prog(ppc64.AMOVD) p.From.Type = obj.TYPE_REG p.From.Reg = ppc64.REGTMP p.To.Type = obj.TYPE_REG p.To.Reg = ppc64.REG_CTR // Don't generate padding for // loops with few iterations. if ctr > 3 { p = s.Prog(obj.APCALIGN) p.From.Type = obj.TYPE_CONST p.From.Offset = 16 } // generate 4 STXVs to zero 64 bytes var top *obj.Prog p = s.Prog(ppc64.ASTXV) p.From.Type = obj.TYPE_REG p.From.Reg = ppc64.REG_VS32 p.To.Type = obj.TYPE_MEM p.To.Reg = v.Args[0].Reg() // Save the top of loop if top == nil { top = p } p = s.Prog(ppc64.ASTXV) p.From.Type = obj.TYPE_REG p.From.Reg = ppc64.REG_VS32 p.To.Type = obj.TYPE_MEM p.To.Reg = v.Args[0].Reg() p.To.Offset = 16 p = s.Prog(ppc64.ASTXV) p.From.Type = obj.TYPE_REG p.From.Reg = ppc64.REG_VS32 p.To.Type = obj.TYPE_MEM p.To.Reg = v.Args[0].Reg() p.To.Offset = 32 p = s.Prog(ppc64.ASTXV) p.From.Type = obj.TYPE_REG p.From.Reg = ppc64.REG_VS32 p.To.Type = obj.TYPE_MEM p.To.Reg = v.Args[0].Reg() p.To.Offset = 48 // Increment address for the // 64 bytes just zeroed. p = s.Prog(ppc64.AADD) p.Reg = v.Args[0].Reg() p.From.Type = obj.TYPE_CONST p.From.Offset = 64 p.To.Type = obj.TYPE_REG p.To.Reg = v.Args[0].Reg() // Branch back to top of loop // based on CTR // BC with BO_BCTR generates bdnz p = s.Prog(ppc64.ABC) p.From.Type = obj.TYPE_CONST p.From.Offset = ppc64.BO_BCTR p.Reg = ppc64.REG_CR0LT p.To.Type = obj.TYPE_BRANCH p.To.SetTarget(top) } // When ctr == 1 the loop was not generated but // there are at least 64 bytes to clear, so add // that to the remainder to generate the code // to clear those doublewords if ctr == 1 { rem += 64 } // Clear the remainder starting at offset zero offset := int64(0) if rem >= 16 && ctr <= 1 { // If the XXLXOR hasn't already been // generated, do it here to initialize // VS32 (V0) to 0. p := s.Prog(ppc64.AXXLXOR) p.From.Type = obj.TYPE_REG p.From.Reg = ppc64.REG_VS32 p.To.Type = obj.TYPE_REG p.To.Reg = ppc64.REG_VS32 p.Reg = ppc64.REG_VS32 } // Generate STXV for 32 or 64 // bytes. for rem >= 32 { p := s.Prog(ppc64.ASTXV) p.From.Type = obj.TYPE_REG p.From.Reg = ppc64.REG_VS32 p.To.Type = obj.TYPE_MEM p.To.Reg = v.Args[0].Reg() p.To.Offset = offset p = s.Prog(ppc64.ASTXV) p.From.Type = obj.TYPE_REG p.From.Reg = ppc64.REG_VS32 p.To.Type = obj.TYPE_MEM p.To.Reg = v.Args[0].Reg() p.To.Offset = offset + 16 offset += 32 rem -= 32 } // Generate 16 bytes if rem >= 16 { p := s.Prog(ppc64.ASTXV) p.From.Type = obj.TYPE_REG p.From.Reg = ppc64.REG_VS32 p.To.Type = obj.TYPE_MEM p.To.Reg = v.Args[0].Reg() p.To.Offset = offset offset += 16 rem -= 16 } // first clear as many doublewords as possible // then clear remaining sizes as available for rem > 0 { op, size := ppc64.AMOVB, int64(1) switch { case rem >= 8: op, size = ppc64.AMOVD, 8 case rem >= 4: op, size = ppc64.AMOVW, 4 case rem >= 2: op, size = ppc64.AMOVH, 2 } p := s.Prog(op) p.From.Type = obj.TYPE_REG p.From.Reg = ppc64.REG_R0 p.To.Type = obj.TYPE_MEM p.To.Reg = v.Args[0].Reg() p.To.Offset = offset rem -= size offset += size } case ssa.OpPPC64LoweredZero, ssa.OpPPC64LoweredZeroShort: // Unaligned data doesn't hurt performance // for these instructions on power8. // For sizes >= 64 generate a loop as follows: // Set up loop counter in CTR, used by BC // XXLXOR VS32,VS32,VS32 // MOVD len/32,REG_TMP // MOVD REG_TMP,CTR // MOVD $16,REG_TMP // loop: // STXVD2X VS32,(R0)(R20) // STXVD2X VS32,(R31)(R20) // ADD $32,R20 // BC 16, 0, loop // // any remainder is done as described below // for sizes < 64 bytes, first clear as many doublewords as possible, // then handle the remainder // MOVD R0,(R20) // MOVD R0,8(R20) // .... etc. // // the remainder bytes are cleared using one or more // of the following instructions with the appropriate // offsets depending which instructions are needed // // MOVW R0,n1(R20) 4 bytes // MOVH R0,n2(R20) 2 bytes // MOVB R0,n3(R20) 1 byte // // 7 bytes: MOVW, MOVH, MOVB // 6 bytes: MOVW, MOVH // 5 bytes: MOVW, MOVB // 3 bytes: MOVH, MOVB // each loop iteration does 32 bytes ctr := v.AuxInt / 32 // remainder bytes rem := v.AuxInt % 32 // only generate a loop if there is more // than 1 iteration. if ctr > 1 { // Set up VS32 (V0) to hold 0s p := s.Prog(ppc64.AXXLXOR) p.From.Type = obj.TYPE_REG p.From.Reg = ppc64.REG_VS32 p.To.Type = obj.TYPE_REG p.To.Reg = ppc64.REG_VS32 p.Reg = ppc64.REG_VS32 // Set up CTR loop counter p = s.Prog(ppc64.AMOVD) p.From.Type = obj.TYPE_CONST p.From.Offset = ctr p.To.Type = obj.TYPE_REG p.To.Reg = ppc64.REGTMP p = s.Prog(ppc64.AMOVD) p.From.Type = obj.TYPE_REG p.From.Reg = ppc64.REGTMP p.To.Type = obj.TYPE_REG p.To.Reg = ppc64.REG_CTR // Set up R31 to hold index value 16 p = s.Prog(ppc64.AMOVD) p.From.Type = obj.TYPE_CONST p.From.Offset = 16 p.To.Type = obj.TYPE_REG p.To.Reg = ppc64.REGTMP // Don't add padding for alignment // with few loop iterations. if ctr > 3 { p = s.Prog(obj.APCALIGN) p.From.Type = obj.TYPE_CONST p.From.Offset = 16 } // generate 2 STXVD2Xs to store 16 bytes // when this is a loop then the top must be saved var top *obj.Prog // This is the top of loop p = s.Prog(ppc64.ASTXVD2X) p.From.Type = obj.TYPE_REG p.From.Reg = ppc64.REG_VS32 p.To.Type = obj.TYPE_MEM p.To.Reg = v.Args[0].Reg() p.To.Index = ppc64.REGZERO // Save the top of loop if top == nil { top = p } p = s.Prog(ppc64.ASTXVD2X) p.From.Type = obj.TYPE_REG p.From.Reg = ppc64.REG_VS32 p.To.Type = obj.TYPE_MEM p.To.Reg = v.Args[0].Reg() p.To.Index = ppc64.REGTMP // Increment address for the // 4 doublewords just zeroed. p = s.Prog(ppc64.AADD) p.Reg = v.Args[0].Reg() p.From.Type = obj.TYPE_CONST p.From.Offset = 32 p.To.Type = obj.TYPE_REG p.To.Reg = v.Args[0].Reg() // Branch back to top of loop // based on CTR // BC with BO_BCTR generates bdnz p = s.Prog(ppc64.ABC) p.From.Type = obj.TYPE_CONST p.From.Offset = ppc64.BO_BCTR p.Reg = ppc64.REG_CR0LT p.To.Type = obj.TYPE_BRANCH p.To.SetTarget(top) } // when ctr == 1 the loop was not generated but // there are at least 32 bytes to clear, so add // that to the remainder to generate the code // to clear those doublewords if ctr == 1 { rem += 32 } // clear the remainder starting at offset zero offset := int64(0) // first clear as many doublewords as possible // then clear remaining sizes as available for rem > 0 { op, size := ppc64.AMOVB, int64(1) switch { case rem >= 8: op, size = ppc64.AMOVD, 8 case rem >= 4: op, size = ppc64.AMOVW, 4 case rem >= 2: op, size = ppc64.AMOVH, 2 } p := s.Prog(op) p.From.Type = obj.TYPE_REG p.From.Reg = ppc64.REG_R0 p.To.Type = obj.TYPE_MEM p.To.Reg = v.Args[0].Reg() p.To.Offset = offset rem -= size offset += size } case ssa.OpPPC64LoweredMove, ssa.OpPPC64LoweredMoveShort: bytesPerLoop := int64(32) // This will be used when moving more // than 8 bytes. Moves start with // as many 8 byte moves as possible, then // 4, 2, or 1 byte(s) as remaining. This will // work and be efficient for power8 or later. // If there are 64 or more bytes, then a // loop is generated to move 32 bytes and // update the src and dst addresses on each // iteration. When < 64 bytes, the appropriate // number of moves are generated based on the // size. // When moving >= 64 bytes a loop is used // MOVD len/32,REG_TMP // MOVD REG_TMP,CTR // MOVD $16,REG_TMP // top: // LXVD2X (R0)(R21),VS32 // LXVD2X (R31)(R21),VS33 // ADD $32,R21 // STXVD2X VS32,(R0)(R20) // STXVD2X VS33,(R31)(R20) // ADD $32,R20 // BC 16,0,top // Bytes not moved by this loop are moved // with a combination of the following instructions, // starting with the largest sizes and generating as // many as needed, using the appropriate offset value. // MOVD n(R21),R31 // MOVD R31,n(R20) // MOVW n1(R21),R31 // MOVW R31,n1(R20) // MOVH n2(R21),R31 // MOVH R31,n2(R20) // MOVB n3(R21),R31 // MOVB R31,n3(R20) // Each loop iteration moves 32 bytes ctr := v.AuxInt / bytesPerLoop // Remainder after the loop rem := v.AuxInt % bytesPerLoop dstReg := v.Args[0].Reg() srcReg := v.Args[1].Reg() // The set of registers used here, must match the clobbered reg list // in PPC64Ops.go. offset := int64(0) // top of the loop var top *obj.Prog // Only generate looping code when loop counter is > 1 for >= 64 bytes if ctr > 1 { // Set up the CTR p := s.Prog(ppc64.AMOVD) p.From.Type = obj.TYPE_CONST p.From.Offset = ctr p.To.Type = obj.TYPE_REG p.To.Reg = ppc64.REGTMP p = s.Prog(ppc64.AMOVD) p.From.Type = obj.TYPE_REG p.From.Reg = ppc64.REGTMP p.To.Type = obj.TYPE_REG p.To.Reg = ppc64.REG_CTR // Use REGTMP as index reg p = s.Prog(ppc64.AMOVD) p.From.Type = obj.TYPE_CONST p.From.Offset = 16 p.To.Type = obj.TYPE_REG p.To.Reg = ppc64.REGTMP // Don't adding padding for // alignment with small iteration // counts. if ctr > 3 { p = s.Prog(obj.APCALIGN) p.From.Type = obj.TYPE_CONST p.From.Offset = 16 } // Generate 16 byte loads and stores. // Use temp register for index (16) // on the second one. p = s.Prog(ppc64.ALXVD2X) p.From.Type = obj.TYPE_MEM p.From.Reg = srcReg p.From.Index = ppc64.REGZERO p.To.Type = obj.TYPE_REG p.To.Reg = ppc64.REG_VS32 if top == nil { top = p } p = s.Prog(ppc64.ALXVD2X) p.From.Type = obj.TYPE_MEM p.From.Reg = srcReg p.From.Index = ppc64.REGTMP p.To.Type = obj.TYPE_REG p.To.Reg = ppc64.REG_VS33 // increment the src reg for next iteration p = s.Prog(ppc64.AADD) p.Reg = srcReg p.From.Type = obj.TYPE_CONST p.From.Offset = bytesPerLoop p.To.Type = obj.TYPE_REG p.To.Reg = srcReg // generate 16 byte stores p = s.Prog(ppc64.ASTXVD2X) p.From.Type = obj.TYPE_REG p.From.Reg = ppc64.REG_VS32 p.To.Type = obj.TYPE_MEM p.To.Reg = dstReg p.To.Index = ppc64.REGZERO p = s.Prog(ppc64.ASTXVD2X) p.From.Type = obj.TYPE_REG p.From.Reg = ppc64.REG_VS33 p.To.Type = obj.TYPE_MEM p.To.Reg = dstReg p.To.Index = ppc64.REGTMP // increment the dst reg for next iteration p = s.Prog(ppc64.AADD) p.Reg = dstReg p.From.Type = obj.TYPE_CONST p.From.Offset = bytesPerLoop p.To.Type = obj.TYPE_REG p.To.Reg = dstReg // BC with BO_BCTR generates bdnz to branch on nonzero CTR // to loop top. p = s.Prog(ppc64.ABC) p.From.Type = obj.TYPE_CONST p.From.Offset = ppc64.BO_BCTR p.Reg = ppc64.REG_CR0LT p.To.Type = obj.TYPE_BRANCH p.To.SetTarget(top) // srcReg and dstReg were incremented in the loop, so // later instructions start with offset 0. offset = int64(0) } // No loop was generated for one iteration, so // add 32 bytes to the remainder to move those bytes. if ctr == 1 { rem += bytesPerLoop } if rem >= 16 { // Generate 16 byte loads and stores. // Use temp register for index (value 16) // on the second one. p := s.Prog(ppc64.ALXVD2X) p.From.Type = obj.TYPE_MEM p.From.Reg = srcReg p.From.Index = ppc64.REGZERO p.To.Type = obj.TYPE_REG p.To.Reg = ppc64.REG_VS32 p = s.Prog(ppc64.ASTXVD2X) p.From.Type = obj.TYPE_REG p.From.Reg = ppc64.REG_VS32 p.To.Type = obj.TYPE_MEM p.To.Reg = dstReg p.To.Index = ppc64.REGZERO offset = 16 rem -= 16 if rem >= 16 { // Use REGTMP as index reg p := s.Prog(ppc64.AMOVD) p.From.Type = obj.TYPE_CONST p.From.Offset = 16 p.To.Type = obj.TYPE_REG p.To.Reg = ppc64.REGTMP p = s.Prog(ppc64.ALXVD2X) p.From.Type = obj.TYPE_MEM p.From.Reg = srcReg p.From.Index = ppc64.REGTMP p.To.Type = obj.TYPE_REG p.To.Reg = ppc64.REG_VS32 p = s.Prog(ppc64.ASTXVD2X) p.From.Type = obj.TYPE_REG p.From.Reg = ppc64.REG_VS32 p.To.Type = obj.TYPE_MEM p.To.Reg = dstReg p.To.Index = ppc64.REGTMP offset = 32 rem -= 16 } } // Generate all the remaining load and store pairs, starting with // as many 8 byte moves as possible, then 4, 2, 1. for rem > 0 { op, size := ppc64.AMOVB, int64(1) switch { case rem >= 8: op, size = ppc64.AMOVD, 8 case rem >= 4: op, size = ppc64.AMOVWZ, 4 case rem >= 2: op, size = ppc64.AMOVH, 2 } // Load p := s.Prog(op) p.To.Type = obj.TYPE_REG p.To.Reg = ppc64.REGTMP p.From.Type = obj.TYPE_MEM p.From.Reg = srcReg p.From.Offset = offset // Store p = s.Prog(op) p.From.Type = obj.TYPE_REG p.From.Reg = ppc64.REGTMP p.To.Type = obj.TYPE_MEM p.To.Reg = dstReg p.To.Offset = offset rem -= size offset += size } case ssa.OpPPC64LoweredQuadMove, ssa.OpPPC64LoweredQuadMoveShort: bytesPerLoop := int64(64) // This is used when moving more // than 8 bytes on power9. Moves start with // as many 8 byte moves as possible, then // 4, 2, or 1 byte(s) as remaining. This will // work and be efficient for power8 or later. // If there are 64 or more bytes, then a // loop is generated to move 32 bytes and // update the src and dst addresses on each // iteration. When < 64 bytes, the appropriate // number of moves are generated based on the // size. // When moving >= 64 bytes a loop is used // MOVD len/32,REG_TMP // MOVD REG_TMP,CTR // top: // LXV 0(R21),VS32 // LXV 16(R21),VS33 // ADD $32,R21 // STXV VS32,0(R20) // STXV VS33,16(R20) // ADD $32,R20 // BC 16,0,top // Bytes not moved by this loop are moved // with a combination of the following instructions, // starting with the largest sizes and generating as // many as needed, using the appropriate offset value. // MOVD n(R21),R31 // MOVD R31,n(R20) // MOVW n1(R21),R31 // MOVW R31,n1(R20) // MOVH n2(R21),R31 // MOVH R31,n2(R20) // MOVB n3(R21),R31 // MOVB R31,n3(R20) // Each loop iteration moves 32 bytes ctr := v.AuxInt / bytesPerLoop // Remainder after the loop rem := v.AuxInt % bytesPerLoop dstReg := v.Args[0].Reg() srcReg := v.Args[1].Reg() offset := int64(0) // top of the loop var top *obj.Prog // Only generate looping code when loop counter is > 1 for >= 64 bytes if ctr > 1 { // Set up the CTR p := s.Prog(ppc64.AMOVD) p.From.Type = obj.TYPE_CONST p.From.Offset = ctr p.To.Type = obj.TYPE_REG p.To.Reg = ppc64.REGTMP p = s.Prog(ppc64.AMOVD) p.From.Type = obj.TYPE_REG p.From.Reg = ppc64.REGTMP p.To.Type = obj.TYPE_REG p.To.Reg = ppc64.REG_CTR p = s.Prog(obj.APCALIGN) p.From.Type = obj.TYPE_CONST p.From.Offset = 16 // Generate 16 byte loads and stores. p = s.Prog(ppc64.ALXV) p.From.Type = obj.TYPE_MEM p.From.Reg = srcReg p.From.Offset = offset p.To.Type = obj.TYPE_REG p.To.Reg = ppc64.REG_VS32 if top == nil { top = p } p = s.Prog(ppc64.ALXV) p.From.Type = obj.TYPE_MEM p.From.Reg = srcReg p.From.Offset = offset + 16 p.To.Type = obj.TYPE_REG p.To.Reg = ppc64.REG_VS33 // generate 16 byte stores p = s.Prog(ppc64.ASTXV) p.From.Type = obj.TYPE_REG p.From.Reg = ppc64.REG_VS32 p.To.Type = obj.TYPE_MEM p.To.Reg = dstReg p.To.Offset = offset p = s.Prog(ppc64.ASTXV) p.From.Type = obj.TYPE_REG p.From.Reg = ppc64.REG_VS33 p.To.Type = obj.TYPE_MEM p.To.Reg = dstReg p.To.Offset = offset + 16 // Generate 16 byte loads and stores. p = s.Prog(ppc64.ALXV) p.From.Type = obj.TYPE_MEM p.From.Reg = srcReg p.From.Offset = offset + 32 p.To.Type = obj.TYPE_REG p.To.Reg = ppc64.REG_VS32 p = s.Prog(ppc64.ALXV) p.From.Type = obj.TYPE_MEM p.From.Reg = srcReg p.From.Offset = offset + 48 p.To.Type = obj.TYPE_REG p.To.Reg = ppc64.REG_VS33 // generate 16 byte stores p = s.Prog(ppc64.ASTXV) p.From.Type = obj.TYPE_REG p.From.Reg = ppc64.REG_VS32 p.To.Type = obj.TYPE_MEM p.To.Reg = dstReg p.To.Offset = offset + 32 p = s.Prog(ppc64.ASTXV) p.From.Type = obj.TYPE_REG p.From.Reg = ppc64.REG_VS33 p.To.Type = obj.TYPE_MEM p.To.Reg = dstReg p.To.Offset = offset + 48 // increment the src reg for next iteration p = s.Prog(ppc64.AADD) p.Reg = srcReg p.From.Type = obj.TYPE_CONST p.From.Offset = bytesPerLoop p.To.Type = obj.TYPE_REG p.To.Reg = srcReg // increment the dst reg for next iteration p = s.Prog(ppc64.AADD) p.Reg = dstReg p.From.Type = obj.TYPE_CONST p.From.Offset = bytesPerLoop p.To.Type = obj.TYPE_REG p.To.Reg = dstReg // BC with BO_BCTR generates bdnz to branch on nonzero CTR // to loop top. p = s.Prog(ppc64.ABC) p.From.Type = obj.TYPE_CONST p.From.Offset = ppc64.BO_BCTR p.Reg = ppc64.REG_CR0LT p.To.Type = obj.TYPE_BRANCH p.To.SetTarget(top) // srcReg and dstReg were incremented in the loop, so // later instructions start with offset 0. offset = int64(0) } // No loop was generated for one iteration, so // add 32 bytes to the remainder to move those bytes. if ctr == 1 { rem += bytesPerLoop } if rem >= 32 { p := s.Prog(ppc64.ALXV) p.From.Type = obj.TYPE_MEM p.From.Reg = srcReg p.To.Type = obj.TYPE_REG p.To.Reg = ppc64.REG_VS32 p = s.Prog(ppc64.ALXV) p.From.Type = obj.TYPE_MEM p.From.Reg = srcReg p.From.Offset = 16 p.To.Type = obj.TYPE_REG p.To.Reg = ppc64.REG_VS33 p = s.Prog(ppc64.ASTXV) p.From.Type = obj.TYPE_REG p.From.Reg = ppc64.REG_VS32 p.To.Type = obj.TYPE_MEM p.To.Reg = dstReg p = s.Prog(ppc64.ASTXV) p.From.Type = obj.TYPE_REG p.From.Reg = ppc64.REG_VS33 p.To.Type = obj.TYPE_MEM p.To.Reg = dstReg p.To.Offset = 16 offset = 32 rem -= 32 } if rem >= 16 { // Generate 16 byte loads and stores. p := s.Prog(ppc64.ALXV) p.From.Type = obj.TYPE_MEM p.From.Reg = srcReg p.From.Offset = offset p.To.Type = obj.TYPE_REG p.To.Reg = ppc64.REG_VS32 p = s.Prog(ppc64.ASTXV) p.From.Type = obj.TYPE_REG p.From.Reg = ppc64.REG_VS32 p.To.Type = obj.TYPE_MEM p.To.Reg = dstReg p.To.Offset = offset offset += 16 rem -= 16 if rem >= 16 { p := s.Prog(ppc64.ALXV) p.From.Type = obj.TYPE_MEM p.From.Reg = srcReg p.From.Offset = offset p.To.Type = obj.TYPE_REG p.To.Reg = ppc64.REG_VS32 p = s.Prog(ppc64.ASTXV) p.From.Type = obj.TYPE_REG p.From.Reg = ppc64.REG_VS32 p.To.Type = obj.TYPE_MEM p.To.Reg = dstReg p.To.Offset = offset offset += 16 rem -= 16 } } // Generate all the remaining load and store pairs, starting with // as many 8 byte moves as possible, then 4, 2, 1. for rem > 0 { op, size := ppc64.AMOVB, int64(1) switch { case rem >= 8: op, size = ppc64.AMOVD, 8 case rem >= 4: op, size = ppc64.AMOVWZ, 4 case rem >= 2: op, size = ppc64.AMOVH, 2 } // Load p := s.Prog(op) p.To.Type = obj.TYPE_REG p.To.Reg = ppc64.REGTMP p.From.Type = obj.TYPE_MEM p.From.Reg = srcReg p.From.Offset = offset // Store p = s.Prog(op) p.From.Type = obj.TYPE_REG p.From.Reg = ppc64.REGTMP p.To.Type = obj.TYPE_MEM p.To.Reg = dstReg p.To.Offset = offset rem -= size offset += size } case ssa.OpPPC64CALLstatic: s.Call(v) case ssa.OpPPC64CALLtail: s.TailCall(v) case ssa.OpPPC64CALLclosure, ssa.OpPPC64CALLinter: p := s.Prog(ppc64.AMOVD) p.From.Type = obj.TYPE_REG p.From.Reg = v.Args[0].Reg() p.To.Type = obj.TYPE_REG p.To.Reg = ppc64.REG_LR if v.Args[0].Reg() != ppc64.REG_R12 { v.Fatalf("Function address for %v should be in R12 %d but is in %d", v.LongString(), ppc64.REG_R12, p.From.Reg) } pp := s.Call(v) // Convert the call into a blrl with hint this is not a subroutine return. // The full bclrl opcode must be specified when passing a hint. pp.As = ppc64.ABCL pp.From.Type = obj.TYPE_CONST pp.From.Offset = ppc64.BO_ALWAYS pp.Reg = ppc64.REG_CR0LT // The preferred value if BI is ignored. pp.To.Reg = ppc64.REG_LR pp.AddRestSourceConst(1) if ppc64.NeedTOCpointer(base.Ctxt) { // When compiling Go into PIC, the function we just // called via pointer might have been implemented in // a separate module and so overwritten the TOC // pointer in R2; reload it. q := s.Prog(ppc64.AMOVD) q.From.Type = obj.TYPE_MEM q.From.Offset = 24 q.From.Reg = ppc64.REGSP q.To.Type = obj.TYPE_REG q.To.Reg = ppc64.REG_R2 } case ssa.OpPPC64LoweredWB: p := s.Prog(obj.ACALL) p.To.Type = obj.TYPE_MEM p.To.Name = obj.NAME_EXTERN // AuxInt encodes how many buffer entries we need. p.To.Sym = ir.Syms.GCWriteBarrier[v.AuxInt-1] case ssa.OpPPC64LoweredPanicBoundsA, ssa.OpPPC64LoweredPanicBoundsB, ssa.OpPPC64LoweredPanicBoundsC: p := s.Prog(obj.ACALL) p.To.Type = obj.TYPE_MEM p.To.Name = obj.NAME_EXTERN p.To.Sym = ssagen.BoundsCheckFunc[v.AuxInt] s.UseArgs(16) // space used in callee args area by assembly stubs case ssa.OpPPC64LoweredNilCheck: if buildcfg.GOOS == "aix" { // CMP Rarg0, $0 // BNE 2(PC) // STW R0, 0(R0) // NOP (so the BNE has somewhere to land) // CMP Rarg0, $0 p := s.Prog(ppc64.ACMP) p.From.Type = obj.TYPE_REG p.From.Reg = v.Args[0].Reg() p.To.Type = obj.TYPE_CONST p.To.Offset = 0 // BNE 2(PC) p2 := s.Prog(ppc64.ABNE) p2.To.Type = obj.TYPE_BRANCH // STW R0, 0(R0) // Write at 0 is forbidden and will trigger a SIGSEGV p = s.Prog(ppc64.AMOVW) p.From.Type = obj.TYPE_REG p.From.Reg = ppc64.REG_R0 p.To.Type = obj.TYPE_MEM p.To.Reg = ppc64.REG_R0 // NOP (so the BNE has somewhere to land) nop := s.Prog(obj.ANOP) p2.To.SetTarget(nop) } else { // Issue a load which will fault if arg is nil. p := s.Prog(ppc64.AMOVBZ) p.From.Type = obj.TYPE_MEM p.From.Reg = v.Args[0].Reg() ssagen.AddAux(&p.From, v) p.To.Type = obj.TYPE_REG p.To.Reg = ppc64.REGTMP } if logopt.Enabled() { logopt.LogOpt(v.Pos, "nilcheck", "genssa", v.Block.Func.Name) } if base.Debug.Nil != 0 && v.Pos.Line() > 1 { // v.Pos.Line()==1 in generated wrappers base.WarnfAt(v.Pos, "generated nil check") } // These should be resolved by rules and not make it here. case ssa.OpPPC64Equal, ssa.OpPPC64NotEqual, ssa.OpPPC64LessThan, ssa.OpPPC64FLessThan, ssa.OpPPC64LessEqual, ssa.OpPPC64GreaterThan, ssa.OpPPC64FGreaterThan, ssa.OpPPC64GreaterEqual, ssa.OpPPC64FLessEqual, ssa.OpPPC64FGreaterEqual: v.Fatalf("Pseudo-op should not make it to codegen: %s ###\n", v.LongString()) case ssa.OpPPC64InvertFlags: v.Fatalf("InvertFlags should never make it to codegen %v", v.LongString()) case ssa.OpPPC64FlagEQ, ssa.OpPPC64FlagLT, ssa.OpPPC64FlagGT: v.Fatalf("Flag* ops should never make it to codegen %v", v.LongString()) case ssa.OpClobber, ssa.OpClobberReg: // TODO: implement for clobberdead experiment. Nop is ok for now. default: v.Fatalf("genValue not implemented: %s", v.LongString()) } } var blockJump = [...]struct { asm, invasm obj.As asmeq, invasmun bool }{ ssa.BlockPPC64EQ: {ppc64.ABEQ, ppc64.ABNE, false, false}, ssa.BlockPPC64NE: {ppc64.ABNE, ppc64.ABEQ, false, false}, ssa.BlockPPC64LT: {ppc64.ABLT, ppc64.ABGE, false, false}, ssa.BlockPPC64GE: {ppc64.ABGE, ppc64.ABLT, false, false}, ssa.BlockPPC64LE: {ppc64.ABLE, ppc64.ABGT, false, false}, ssa.BlockPPC64GT: {ppc64.ABGT, ppc64.ABLE, false, false}, // TODO: need to work FP comparisons into block jumps ssa.BlockPPC64FLT: {ppc64.ABLT, ppc64.ABGE, false, false}, ssa.BlockPPC64FGE: {ppc64.ABGT, ppc64.ABLT, true, true}, // GE = GT or EQ; !GE = LT or UN ssa.BlockPPC64FLE: {ppc64.ABLT, ppc64.ABGT, true, true}, // LE = LT or EQ; !LE = GT or UN ssa.BlockPPC64FGT: {ppc64.ABGT, ppc64.ABLE, false, false}, } func ssaGenBlock(s *ssagen.State, b, next *ssa.Block) { switch b.Kind { case ssa.BlockDefer: // defer returns in R3: // 0 if we should continue executing // 1 if we should jump to deferreturn call p := s.Prog(ppc64.ACMP) p.From.Type = obj.TYPE_REG p.From.Reg = ppc64.REG_R3 p.To.Type = obj.TYPE_CONST p.To.Offset = 0 p = s.Prog(ppc64.ABNE) p.To.Type = obj.TYPE_BRANCH s.Branches = append(s.Branches, ssagen.Branch{P: p, B: b.Succs[1].Block()}) if b.Succs[0].Block() != next { p := s.Prog(obj.AJMP) p.To.Type = obj.TYPE_BRANCH s.Branches = append(s.Branches, ssagen.Branch{P: p, B: b.Succs[0].Block()}) } case ssa.BlockPlain: if b.Succs[0].Block() != next { p := s.Prog(obj.AJMP) p.To.Type = obj.TYPE_BRANCH s.Branches = append(s.Branches, ssagen.Branch{P: p, B: b.Succs[0].Block()}) } case ssa.BlockExit, ssa.BlockRetJmp: case ssa.BlockRet: s.Prog(obj.ARET) case ssa.BlockPPC64EQ, ssa.BlockPPC64NE, ssa.BlockPPC64LT, ssa.BlockPPC64GE, ssa.BlockPPC64LE, ssa.BlockPPC64GT, ssa.BlockPPC64FLT, ssa.BlockPPC64FGE, ssa.BlockPPC64FLE, ssa.BlockPPC64FGT: jmp := blockJump[b.Kind] switch next { case b.Succs[0].Block(): s.Br(jmp.invasm, b.Succs[1].Block()) if jmp.invasmun { // TODO: The second branch is probably predict-not-taken since it is for FP unordered s.Br(ppc64.ABVS, b.Succs[1].Block()) } case b.Succs[1].Block(): s.Br(jmp.asm, b.Succs[0].Block()) if jmp.asmeq { s.Br(ppc64.ABEQ, b.Succs[0].Block()) } default: if b.Likely != ssa.BranchUnlikely { s.Br(jmp.asm, b.Succs[0].Block()) if jmp.asmeq { s.Br(ppc64.ABEQ, b.Succs[0].Block()) } s.Br(obj.AJMP, b.Succs[1].Block()) } else { s.Br(jmp.invasm, b.Succs[1].Block()) if jmp.invasmun { // TODO: The second branch is probably predict-not-taken since it is for FP unordered s.Br(ppc64.ABVS, b.Succs[1].Block()) } s.Br(obj.AJMP, b.Succs[0].Block()) } } default: b.Fatalf("branch not implemented: %s", b.LongString()) } } func loadRegResult(s *ssagen.State, f *ssa.Func, t *types.Type, reg int16, n *ir.Name, off int64) *obj.Prog { p := s.Prog(loadByType(t)) p.From.Type = obj.TYPE_MEM p.From.Name = obj.NAME_AUTO p.From.Sym = n.Linksym() p.From.Offset = n.FrameOffset() + off p.To.Type = obj.TYPE_REG p.To.Reg = reg return p } func spillArgReg(pp *objw.Progs, p *obj.Prog, f *ssa.Func, t *types.Type, reg int16, n *ir.Name, off int64) *obj.Prog { p = pp.Append(p, storeByType(t), obj.TYPE_REG, reg, 0, obj.TYPE_MEM, 0, n.FrameOffset()+off) p.To.Name = obj.NAME_PARAM p.To.Sym = n.Linksym() p.Pos = p.Pos.WithNotStmt() return p }