// Copyright 2016 The Go Authors. All rights reserved. // Use of this source code is governed by a BSD-style // license that can be found in the LICENSE file. package main import "strings" // Notes: // - Integer types live in the low portion of registers. Upper portions are junk. // - Boolean types use the low-order byte of a register. 0=false, 1=true. // Upper bytes are junk. // - When doing sub-register operations, we try to write the whole // destination register to avoid a partial-register write. // - Unused portions of AuxInt (or the Val portion of ValAndOff) are // filled by sign-extending the used portion. Users of AuxInt which interpret // AuxInt as unsigned (e.g. shifts) must be careful. // - The SB 'register' is implemented using instruction-relative addressing. This // places some limitations on when and how memory operands that are addressed // relative to SB can be used: // // 1. Pseudo-instructions do not always map to a single machine instruction when // using the SB 'register' to address data. This is because many machine // instructions do not have relative long (RL suffix) equivalents. For example, // ADDload, which is assembled as AG. // // 2. Loads and stores using relative addressing require the data be aligned // according to its size (8-bytes for double words, 4-bytes for words // and so on). // // We can always work around these by inserting LARL instructions (load address // relative long) in the assembler, but typically this results in worse code // generation because the address can't be re-used. Inserting instructions in the // assembler also means clobbering the temp register and it is a long-term goal // to prevent the compiler doing this so that it can be allocated as a normal // register. // // For more information about the z/Architecture, the instruction set and the // addressing modes it supports take a look at the z/Architecture Principles of // Operation: http://publibfp.boulder.ibm.com/epubs/pdf/dz9zr010.pdf // // Suffixes encode the bit width of pseudo-instructions. // D (double word) = 64 bit (frequently omitted) // W (word) = 32 bit // H (half word) = 16 bit // B (byte) = 8 bit // S (single prec.) = 32 bit (double precision is omitted) // copied from ../../s390x/reg.go var regNamesS390X = []string{ "R0", "R1", "R2", "R3", "R4", "R5", "R6", "R7", "R8", "R9", "R10", "R11", "R12", "g", // R13 "R14", "SP", // R15 "F0", "F1", "F2", "F3", "F4", "F5", "F6", "F7", "F8", "F9", "F10", "F11", "F12", "F13", "F14", "F15", // If you add registers, update asyncPreempt in runtime. //pseudo-registers "SB", } func init() { // Make map from reg names to reg integers. if len(regNamesS390X) > 64 { panic("too many registers") } num := map[string]int{} for i, name := range regNamesS390X { num[name] = i } buildReg := func(s string) regMask { m := regMask(0) for _, r := range strings.Split(s, " ") { if n, ok := num[r]; ok { m |= regMask(1) << uint(n) continue } panic("register " + r + " not found") } return m } // Common individual register masks var ( sp = buildReg("SP") sb = buildReg("SB") r0 = buildReg("R0") tmp = buildReg("R11") // R11 is used as a temporary in a small number of instructions. // R10 is reserved by the assembler. gp = buildReg("R0 R1 R2 R3 R4 R5 R6 R7 R8 R9 R11 R12 R14") gpg = gp | buildReg("g") gpsp = gp | sp // R0 is considered to contain the value 0 in address calculations. ptr = gp &^ r0 ptrsp = ptr | sp ptrspsb = ptrsp | sb fp = buildReg("F0 F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 F13 F14 F15") callerSave = gp | fp | buildReg("g") // runtime.setg (and anything calling it) may clobber g r1 = buildReg("R1") r2 = buildReg("R2") r3 = buildReg("R3") r9 = buildReg("R9") ) // Common slices of register masks var ( gponly = []regMask{gp} fponly = []regMask{fp} ) // Common regInfo var ( gp01 = regInfo{inputs: []regMask{}, outputs: gponly} gp11 = regInfo{inputs: []regMask{gp}, outputs: gponly} gp11sp = regInfo{inputs: []regMask{gpsp}, outputs: gponly} gp21 = regInfo{inputs: []regMask{gp, gp}, outputs: gponly} gp21sp = regInfo{inputs: []regMask{gpsp, gp}, outputs: gponly} gp21tmp = regInfo{inputs: []regMask{gp &^ tmp, gp &^ tmp}, outputs: []regMask{gp &^ tmp}, clobbers: tmp} // R0 evaluates to 0 when used as the number of bits to shift // so we need to exclude it from that operand. sh21 = regInfo{inputs: []regMask{gp, ptr}, outputs: gponly} addr = regInfo{inputs: []regMask{sp | sb}, outputs: gponly} addridx = regInfo{inputs: []regMask{sp | sb, ptrsp}, outputs: gponly} gp2flags = regInfo{inputs: []regMask{gpsp, gpsp}} gp1flags = regInfo{inputs: []regMask{gpsp}} gp2flags1 = regInfo{inputs: []regMask{gp, gp}, outputs: gponly} gp11flags = regInfo{inputs: []regMask{gp}, outputs: gponly} gp21flags = regInfo{inputs: []regMask{gp, gp}, outputs: gponly} gp2flags1flags = regInfo{inputs: []regMask{gp, gp}, outputs: gponly} gpload = regInfo{inputs: []regMask{ptrspsb, 0}, outputs: gponly} gploadidx = regInfo{inputs: []regMask{ptrspsb, ptrsp, 0}, outputs: gponly} gpopload = regInfo{inputs: []regMask{gp, ptrsp, 0}, outputs: gponly} gpstore = regInfo{inputs: []regMask{ptrspsb, gpsp, 0}} gpstoreconst = regInfo{inputs: []regMask{ptrspsb, 0}} gpstoreidx = regInfo{inputs: []regMask{ptrsp, ptrsp, gpsp, 0}} gpstorebr = regInfo{inputs: []regMask{ptrsp, gpsp, 0}} gpstorelaa = regInfo{inputs: []regMask{ptrspsb, gpsp, 0}, outputs: gponly} gpstorelab = regInfo{inputs: []regMask{r1, gpsp, 0}, clobbers: r1} gpmvc = regInfo{inputs: []regMask{ptrsp, ptrsp, 0}} fp01 = regInfo{inputs: []regMask{}, outputs: fponly} fp21 = regInfo{inputs: []regMask{fp, fp}, outputs: fponly} fp31 = regInfo{inputs: []regMask{fp, fp, fp}, outputs: fponly} fp21clobber = regInfo{inputs: []regMask{fp, fp}, outputs: fponly} fpgp = regInfo{inputs: fponly, outputs: gponly} gpfp = regInfo{inputs: gponly, outputs: fponly} fp11 = regInfo{inputs: fponly, outputs: fponly} fp1flags = regInfo{inputs: []regMask{fp}} fp11clobber = regInfo{inputs: fponly, outputs: fponly} fp2flags = regInfo{inputs: []regMask{fp, fp}} fpload = regInfo{inputs: []regMask{ptrspsb, 0}, outputs: fponly} fploadidx = regInfo{inputs: []regMask{ptrsp, ptrsp, 0}, outputs: fponly} fpstore = regInfo{inputs: []regMask{ptrspsb, fp, 0}} fpstoreidx = regInfo{inputs: []regMask{ptrsp, ptrsp, fp, 0}} sync = regInfo{inputs: []regMask{0}} // LoweredAtomicCas may overwrite arg1, so force it to R0 for now. cas = regInfo{inputs: []regMask{ptrsp, r0, gpsp, 0}, outputs: []regMask{gp, 0}, clobbers: r0} // LoweredAtomicExchange overwrites the output before executing // CS{,G}, so the output register must not be the same as the // input register. For now we just force the output register to // R0. exchange = regInfo{inputs: []regMask{ptrsp, gpsp &^ r0, 0}, outputs: []regMask{r0, 0}} ) var S390Xops = []opData{ // fp ops {name: "FADDS", argLength: 2, reg: fp21clobber, typ: "(Float32,Flags)", asm: "FADDS", commutative: true, resultInArg0: true}, // fp32 arg0 + arg1 {name: "FADD", argLength: 2, reg: fp21clobber, typ: "(Float64,Flags)", asm: "FADD", commutative: true, resultInArg0: true}, // fp64 arg0 + arg1 {name: "FSUBS", argLength: 2, reg: fp21clobber, typ: "(Float32,Flags)", asm: "FSUBS", resultInArg0: true}, // fp32 arg0 - arg1 {name: "FSUB", argLength: 2, reg: fp21clobber, typ: "(Float64,Flags)", asm: "FSUB", resultInArg0: true}, // fp64 arg0 - arg1 {name: "FMULS", argLength: 2, reg: fp21, asm: "FMULS", commutative: true, resultInArg0: true}, // fp32 arg0 * arg1 {name: "FMUL", argLength: 2, reg: fp21, asm: "FMUL", commutative: true, resultInArg0: true}, // fp64 arg0 * arg1 {name: "FDIVS", argLength: 2, reg: fp21, asm: "FDIVS", resultInArg0: true}, // fp32 arg0 / arg1 {name: "FDIV", argLength: 2, reg: fp21, asm: "FDIV", resultInArg0: true}, // fp64 arg0 / arg1 {name: "FNEGS", argLength: 1, reg: fp11clobber, asm: "FNEGS", clobberFlags: true}, // fp32 -arg0 {name: "FNEG", argLength: 1, reg: fp11clobber, asm: "FNEG", clobberFlags: true}, // fp64 -arg0 {name: "FMADDS", argLength: 3, reg: fp31, asm: "FMADDS", resultInArg0: true}, // fp32 arg1 * arg2 + arg0 {name: "FMADD", argLength: 3, reg: fp31, asm: "FMADD", resultInArg0: true}, // fp64 arg1 * arg2 + arg0 {name: "FMSUBS", argLength: 3, reg: fp31, asm: "FMSUBS", resultInArg0: true}, // fp32 arg1 * arg2 - arg0 {name: "FMSUB", argLength: 3, reg: fp31, asm: "FMSUB", resultInArg0: true}, // fp64 arg1 * arg2 - arg0 {name: "LPDFR", argLength: 1, reg: fp11, asm: "LPDFR"}, // fp64/fp32 set sign bit {name: "LNDFR", argLength: 1, reg: fp11, asm: "LNDFR"}, // fp64/fp32 clear sign bit {name: "CPSDR", argLength: 2, reg: fp21, asm: "CPSDR"}, // fp64/fp32 copy arg1 sign bit to arg0 // Round to integer, float64 only. // // aux | rounding mode // ----+----------------------------------- // 1 | round to nearest, ties away from 0 // 4 | round to nearest, ties to even // 5 | round toward 0 // 6 | round toward +∞ // 7 | round toward -∞ {name: "FIDBR", argLength: 1, reg: fp11, asm: "FIDBR", aux: "Int8"}, {name: "FMOVSload", argLength: 2, reg: fpload, asm: "FMOVS", aux: "SymOff", faultOnNilArg0: true, symEffect: "Read"}, // fp32 load {name: "FMOVDload", argLength: 2, reg: fpload, asm: "FMOVD", aux: "SymOff", faultOnNilArg0: true, symEffect: "Read"}, // fp64 load {name: "FMOVSconst", reg: fp01, asm: "FMOVS", aux: "Float32", rematerializeable: true}, // fp32 constant {name: "FMOVDconst", reg: fp01, asm: "FMOVD", aux: "Float64", rematerializeable: true}, // fp64 constant {name: "FMOVSloadidx", argLength: 3, reg: fploadidx, asm: "FMOVS", aux: "SymOff", symEffect: "Read"}, // fp32 load indexed by i {name: "FMOVDloadidx", argLength: 3, reg: fploadidx, asm: "FMOVD", aux: "SymOff", symEffect: "Read"}, // fp64 load indexed by i {name: "FMOVSstore", argLength: 3, reg: fpstore, asm: "FMOVS", aux: "SymOff", faultOnNilArg0: true, symEffect: "Write"}, // fp32 store {name: "FMOVDstore", argLength: 3, reg: fpstore, asm: "FMOVD", aux: "SymOff", faultOnNilArg0: true, symEffect: "Write"}, // fp64 store {name: "FMOVSstoreidx", argLength: 4, reg: fpstoreidx, asm: "FMOVS", aux: "SymOff", symEffect: "Write"}, // fp32 indexed by i store {name: "FMOVDstoreidx", argLength: 4, reg: fpstoreidx, asm: "FMOVD", aux: "SymOff", symEffect: "Write"}, // fp64 indexed by i store // binary ops {name: "ADD", argLength: 2, reg: gp21sp, asm: "ADD", commutative: true, clobberFlags: true}, // arg0 + arg1 {name: "ADDW", argLength: 2, reg: gp21sp, asm: "ADDW", commutative: true, clobberFlags: true}, // arg0 + arg1 {name: "ADDconst", argLength: 1, reg: gp11sp, asm: "ADD", aux: "Int32", typ: "UInt64", clobberFlags: true}, // arg0 + auxint {name: "ADDWconst", argLength: 1, reg: gp11sp, asm: "ADDW", aux: "Int32", clobberFlags: true}, // arg0 + auxint {name: "ADDload", argLength: 3, reg: gpopload, asm: "ADD", aux: "SymOff", resultInArg0: true, clobberFlags: true, faultOnNilArg1: true, symEffect: "Read"}, // arg0 + *arg1. arg2=mem {name: "ADDWload", argLength: 3, reg: gpopload, asm: "ADDW", aux: "SymOff", resultInArg0: true, clobberFlags: true, faultOnNilArg1: true, symEffect: "Read"}, // arg0 + *arg1. arg2=mem {name: "SUB", argLength: 2, reg: gp21, asm: "SUB", clobberFlags: true}, // arg0 - arg1 {name: "SUBW", argLength: 2, reg: gp21, asm: "SUBW", clobberFlags: true}, // arg0 - arg1 {name: "SUBconst", argLength: 1, reg: gp11, asm: "SUB", aux: "Int32", resultInArg0: true, clobberFlags: true}, // arg0 - auxint {name: "SUBWconst", argLength: 1, reg: gp11, asm: "SUBW", aux: "Int32", resultInArg0: true, clobberFlags: true}, // arg0 - auxint {name: "SUBload", argLength: 3, reg: gpopload, asm: "SUB", aux: "SymOff", resultInArg0: true, clobberFlags: true, faultOnNilArg1: true, symEffect: "Read"}, // arg0 - *arg1. arg2=mem {name: "SUBWload", argLength: 3, reg: gpopload, asm: "SUBW", aux: "SymOff", resultInArg0: true, clobberFlags: true, faultOnNilArg1: true, symEffect: "Read"}, // arg0 - *arg1. arg2=mem {name: "MULLD", argLength: 2, reg: gp21, asm: "MULLD", typ: "Int64", commutative: true, resultInArg0: true, clobberFlags: true}, // arg0 * arg1 {name: "MULLW", argLength: 2, reg: gp21, asm: "MULLW", typ: "Int32", commutative: true, resultInArg0: true, clobberFlags: true}, // arg0 * arg1 {name: "MULLDconst", argLength: 1, reg: gp11, asm: "MULLD", aux: "Int32", typ: "Int64", resultInArg0: true, clobberFlags: true}, // arg0 * auxint {name: "MULLWconst", argLength: 1, reg: gp11, asm: "MULLW", aux: "Int32", typ: "Int32", resultInArg0: true, clobberFlags: true}, // arg0 * auxint {name: "MULLDload", argLength: 3, reg: gpopload, asm: "MULLD", aux: "SymOff", resultInArg0: true, clobberFlags: true, faultOnNilArg1: true, symEffect: "Read"}, // arg0 * *arg1. arg2=mem {name: "MULLWload", argLength: 3, reg: gpopload, asm: "MULLW", aux: "SymOff", resultInArg0: true, clobberFlags: true, faultOnNilArg1: true, symEffect: "Read"}, // arg0 * *arg1. arg2=mem {name: "MULHD", argLength: 2, reg: gp21tmp, asm: "MULHD", typ: "Int64", commutative: true, resultInArg0: true, clobberFlags: true}, // (arg0 * arg1) >> width {name: "MULHDU", argLength: 2, reg: gp21tmp, asm: "MULHDU", typ: "Int64", commutative: true, resultInArg0: true, clobberFlags: true}, // (arg0 * arg1) >> width {name: "DIVD", argLength: 2, reg: gp21tmp, asm: "DIVD", resultInArg0: true, clobberFlags: true}, // arg0 / arg1 {name: "DIVW", argLength: 2, reg: gp21tmp, asm: "DIVW", resultInArg0: true, clobberFlags: true}, // arg0 / arg1 {name: "DIVDU", argLength: 2, reg: gp21tmp, asm: "DIVDU", resultInArg0: true, clobberFlags: true}, // arg0 / arg1 {name: "DIVWU", argLength: 2, reg: gp21tmp, asm: "DIVWU", resultInArg0: true, clobberFlags: true}, // arg0 / arg1 {name: "MODD", argLength: 2, reg: gp21tmp, asm: "MODD", resultInArg0: true, clobberFlags: true}, // arg0 % arg1 {name: "MODW", argLength: 2, reg: gp21tmp, asm: "MODW", resultInArg0: true, clobberFlags: true}, // arg0 % arg1 {name: "MODDU", argLength: 2, reg: gp21tmp, asm: "MODDU", resultInArg0: true, clobberFlags: true}, // arg0 % arg1 {name: "MODWU", argLength: 2, reg: gp21tmp, asm: "MODWU", resultInArg0: true, clobberFlags: true}, // arg0 % arg1 {name: "AND", argLength: 2, reg: gp21, asm: "AND", commutative: true, clobberFlags: true}, // arg0 & arg1 {name: "ANDW", argLength: 2, reg: gp21, asm: "ANDW", commutative: true, clobberFlags: true}, // arg0 & arg1 {name: "ANDconst", argLength: 1, reg: gp11, asm: "AND", aux: "Int64", resultInArg0: true, clobberFlags: true}, // arg0 & auxint {name: "ANDWconst", argLength: 1, reg: gp11, asm: "ANDW", aux: "Int32", resultInArg0: true, clobberFlags: true}, // arg0 & auxint {name: "ANDload", argLength: 3, reg: gpopload, asm: "AND", aux: "SymOff", resultInArg0: true, clobberFlags: true, faultOnNilArg1: true, symEffect: "Read"}, // arg0 & *arg1. arg2=mem {name: "ANDWload", argLength: 3, reg: gpopload, asm: "ANDW", aux: "SymOff", resultInArg0: true, clobberFlags: true, faultOnNilArg1: true, symEffect: "Read"}, // arg0 & *arg1. arg2=mem {name: "OR", argLength: 2, reg: gp21, asm: "OR", commutative: true, clobberFlags: true}, // arg0 | arg1 {name: "ORW", argLength: 2, reg: gp21, asm: "ORW", commutative: true, clobberFlags: true}, // arg0 | arg1 {name: "ORconst", argLength: 1, reg: gp11, asm: "OR", aux: "Int64", resultInArg0: true, clobberFlags: true}, // arg0 | auxint {name: "ORWconst", argLength: 1, reg: gp11, asm: "ORW", aux: "Int32", resultInArg0: true, clobberFlags: true}, // arg0 | auxint {name: "ORload", argLength: 3, reg: gpopload, asm: "OR", aux: "SymOff", resultInArg0: true, clobberFlags: true, faultOnNilArg1: true, symEffect: "Read"}, // arg0 | *arg1. arg2=mem {name: "ORWload", argLength: 3, reg: gpopload, asm: "ORW", aux: "SymOff", resultInArg0: true, clobberFlags: true, faultOnNilArg1: true, symEffect: "Read"}, // arg0 | *arg1. arg2=mem {name: "XOR", argLength: 2, reg: gp21, asm: "XOR", commutative: true, clobberFlags: true}, // arg0 ^ arg1 {name: "XORW", argLength: 2, reg: gp21, asm: "XORW", commutative: true, clobberFlags: true}, // arg0 ^ arg1 {name: "XORconst", argLength: 1, reg: gp11, asm: "XOR", aux: "Int64", resultInArg0: true, clobberFlags: true}, // arg0 ^ auxint {name: "XORWconst", argLength: 1, reg: gp11, asm: "XORW", aux: "Int32", resultInArg0: true, clobberFlags: true}, // arg0 ^ auxint {name: "XORload", argLength: 3, reg: gpopload, asm: "XOR", aux: "SymOff", resultInArg0: true, clobberFlags: true, faultOnNilArg1: true, symEffect: "Read"}, // arg0 ^ *arg1. arg2=mem {name: "XORWload", argLength: 3, reg: gpopload, asm: "XORW", aux: "SymOff", resultInArg0: true, clobberFlags: true, faultOnNilArg1: true, symEffect: "Read"}, // arg0 ^ *arg1. arg2=mem // Arithmetic ops with carry/borrow chain. // // A carry is represented by a condition code of 2 or 3 (GT or OV). // A borrow is represented by a condition code of 0 or 1 (EQ or LT). {name: "ADDC", argLength: 2, reg: gp21flags, asm: "ADDC", typ: "(UInt64,Flags)", commutative: true}, // (arg0 + arg1, carry out) {name: "ADDCconst", argLength: 1, reg: gp11flags, asm: "ADDC", typ: "(UInt64,Flags)", aux: "Int16"}, // (arg0 + auxint, carry out) {name: "ADDE", argLength: 3, reg: gp2flags1flags, asm: "ADDE", typ: "(UInt64,Flags)", commutative: true, resultInArg0: true}, // (arg0 + arg1 + arg2 (carry in), carry out) {name: "SUBC", argLength: 2, reg: gp21flags, asm: "SUBC", typ: "(UInt64,Flags)"}, // (arg0 - arg1, borrow out) {name: "SUBE", argLength: 3, reg: gp2flags1flags, asm: "SUBE", typ: "(UInt64,Flags)", resultInArg0: true}, // (arg0 - arg1 - arg2 (borrow in), borrow out) // Comparisons. {name: "CMP", argLength: 2, reg: gp2flags, asm: "CMP", typ: "Flags"}, // arg0 compare to arg1 {name: "CMPW", argLength: 2, reg: gp2flags, asm: "CMPW", typ: "Flags"}, // arg0 compare to arg1 {name: "CMPU", argLength: 2, reg: gp2flags, asm: "CMPU", typ: "Flags"}, // arg0 compare to arg1 {name: "CMPWU", argLength: 2, reg: gp2flags, asm: "CMPWU", typ: "Flags"}, // arg0 compare to arg1 {name: "CMPconst", argLength: 1, reg: gp1flags, asm: "CMP", typ: "Flags", aux: "Int32"}, // arg0 compare to auxint {name: "CMPWconst", argLength: 1, reg: gp1flags, asm: "CMPW", typ: "Flags", aux: "Int32"}, // arg0 compare to auxint {name: "CMPUconst", argLength: 1, reg: gp1flags, asm: "CMPU", typ: "Flags", aux: "Int32"}, // arg0 compare to auxint {name: "CMPWUconst", argLength: 1, reg: gp1flags, asm: "CMPWU", typ: "Flags", aux: "Int32"}, // arg0 compare to auxint {name: "FCMPS", argLength: 2, reg: fp2flags, asm: "CEBR", typ: "Flags"}, // arg0 compare to arg1, f32 {name: "FCMP", argLength: 2, reg: fp2flags, asm: "FCMPU", typ: "Flags"}, // arg0 compare to arg1, f64 {name: "LTDBR", argLength: 1, reg: fp1flags, asm: "LTDBR", typ: "Flags"}, // arg0 compare to 0, f64 {name: "LTEBR", argLength: 1, reg: fp1flags, asm: "LTEBR", typ: "Flags"}, // arg0 compare to 0, f32 {name: "SLD", argLength: 2, reg: sh21, asm: "SLD"}, // arg0 << arg1, shift amount is mod 64 {name: "SLW", argLength: 2, reg: sh21, asm: "SLW"}, // arg0 << arg1, shift amount is mod 64 {name: "SLDconst", argLength: 1, reg: gp11, asm: "SLD", aux: "UInt8"}, // arg0 << auxint, shift amount 0-63 {name: "SLWconst", argLength: 1, reg: gp11, asm: "SLW", aux: "UInt8"}, // arg0 << auxint, shift amount 0-31 {name: "SRD", argLength: 2, reg: sh21, asm: "SRD"}, // unsigned arg0 >> arg1, shift amount is mod 64 {name: "SRW", argLength: 2, reg: sh21, asm: "SRW"}, // unsigned uint32(arg0) >> arg1, shift amount is mod 64 {name: "SRDconst", argLength: 1, reg: gp11, asm: "SRD", aux: "UInt8"}, // unsigned arg0 >> auxint, shift amount 0-63 {name: "SRWconst", argLength: 1, reg: gp11, asm: "SRW", aux: "UInt8"}, // unsigned uint32(arg0) >> auxint, shift amount 0-31 // Arithmetic shifts clobber flags. {name: "SRAD", argLength: 2, reg: sh21, asm: "SRAD", clobberFlags: true}, // signed arg0 >> arg1, shift amount is mod 64 {name: "SRAW", argLength: 2, reg: sh21, asm: "SRAW", clobberFlags: true}, // signed int32(arg0) >> arg1, shift amount is mod 64 {name: "SRADconst", argLength: 1, reg: gp11, asm: "SRAD", aux: "UInt8", clobberFlags: true}, // signed arg0 >> auxint, shift amount 0-63 {name: "SRAWconst", argLength: 1, reg: gp11, asm: "SRAW", aux: "UInt8", clobberFlags: true}, // signed int32(arg0) >> auxint, shift amount 0-31 // Rotate instructions. // Note: no RLLGconst - use RISBGZ instead. {name: "RLLG", argLength: 2, reg: sh21, asm: "RLLG"}, // arg0 rotate left arg1, rotate amount 0-63 {name: "RLL", argLength: 2, reg: sh21, asm: "RLL"}, // arg0 rotate left arg1, rotate amount 0-31 {name: "RLLconst", argLength: 1, reg: gp11, asm: "RLL", aux: "UInt8"}, // arg0 rotate left auxint, rotate amount 0-31 // Rotate then (and|or|xor|insert) selected bits instructions. // // Aux is an s390x.RotateParams struct containing Start, End and rotation // Amount fields. // // arg1 is rotated left by the rotation amount then the bits from the start // bit to the end bit (inclusive) are combined with arg0 using the logical // operation specified. Bit indices are specified from left to right - the // MSB is 0 and the LSB is 63. // // Examples: // | aux | // | instruction | start | end | amount | arg0 | arg1 | result | // +-------------+-------+-----+--------+-----------------------+-----------------------+-----------------------+ // | RXSBG (XOR) | 0 | 1 | 0 | 0xffff_ffff_ffff_ffff | 0xffff_ffff_ffff_ffff | 0x3fff_ffff_ffff_ffff | // | RXSBG (XOR) | 62 | 63 | 0 | 0xffff_ffff_ffff_ffff | 0xffff_ffff_ffff_ffff | 0xffff_ffff_ffff_fffc | // | RXSBG (XOR) | 0 | 47 | 16 | 0xffff_ffff_ffff_ffff | 0x0000_0000_0000_ffff | 0xffff_ffff_0000_ffff | // +-------------+-------+-----+--------+-----------------------+-----------------------+-----------------------+ // {name: "RXSBG", argLength: 2, reg: gp21, asm: "RXSBG", resultInArg0: true, aux: "S390XRotateParams", clobberFlags: true}, // rotate then xor selected bits {name: "RISBGZ", argLength: 1, reg: gp11, asm: "RISBGZ", aux: "S390XRotateParams", clobberFlags: true}, // rotate then insert selected bits [into zero] // unary ops {name: "NEG", argLength: 1, reg: gp11, asm: "NEG", clobberFlags: true}, // -arg0 {name: "NEGW", argLength: 1, reg: gp11, asm: "NEGW", clobberFlags: true}, // -arg0 {name: "NOT", argLength: 1, reg: gp11, resultInArg0: true, clobberFlags: true}, // ^arg0 {name: "NOTW", argLength: 1, reg: gp11, resultInArg0: true, clobberFlags: true}, // ^arg0 {name: "FSQRT", argLength: 1, reg: fp11, asm: "FSQRT"}, // sqrt(arg0) {name: "FSQRTS", argLength: 1, reg: fp11, asm: "FSQRTS"}, // sqrt(arg0), float32 // Conditional register-register moves. // The aux for these values is an s390x.CCMask value representing the condition code mask. {name: "LOCGR", argLength: 3, reg: gp2flags1, resultInArg0: true, asm: "LOCGR", aux: "S390XCCMask"}, // load arg1 into arg0 if the condition code in arg2 matches a masked bit in aux. {name: "MOVBreg", argLength: 1, reg: gp11sp, asm: "MOVB", typ: "Int64"}, // sign extend arg0 from int8 to int64 {name: "MOVBZreg", argLength: 1, reg: gp11sp, asm: "MOVBZ", typ: "UInt64"}, // zero extend arg0 from int8 to int64 {name: "MOVHreg", argLength: 1, reg: gp11sp, asm: "MOVH", typ: "Int64"}, // sign extend arg0 from int16 to int64 {name: "MOVHZreg", argLength: 1, reg: gp11sp, asm: "MOVHZ", typ: "UInt64"}, // zero extend arg0 from int16 to int64 {name: "MOVWreg", argLength: 1, reg: gp11sp, asm: "MOVW", typ: "Int64"}, // sign extend arg0 from int32 to int64 {name: "MOVWZreg", argLength: 1, reg: gp11sp, asm: "MOVWZ", typ: "UInt64"}, // zero extend arg0 from int32 to int64 {name: "MOVDconst", reg: gp01, asm: "MOVD", typ: "UInt64", aux: "Int64", rematerializeable: true}, // auxint {name: "LDGR", argLength: 1, reg: gpfp, asm: "LDGR"}, // move int64 to float64 (no conversion) {name: "LGDR", argLength: 1, reg: fpgp, asm: "LGDR"}, // move float64 to int64 (no conversion) {name: "CFDBRA", argLength: 1, reg: fpgp, asm: "CFDBRA", clobberFlags: true}, // convert float64 to int32 {name: "CGDBRA", argLength: 1, reg: fpgp, asm: "CGDBRA", clobberFlags: true}, // convert float64 to int64 {name: "CFEBRA", argLength: 1, reg: fpgp, asm: "CFEBRA", clobberFlags: true}, // convert float32 to int32 {name: "CGEBRA", argLength: 1, reg: fpgp, asm: "CGEBRA", clobberFlags: true}, // convert float32 to int64 {name: "CEFBRA", argLength: 1, reg: gpfp, asm: "CEFBRA", clobberFlags: true}, // convert int32 to float32 {name: "CDFBRA", argLength: 1, reg: gpfp, asm: "CDFBRA", clobberFlags: true}, // convert int32 to float64 {name: "CEGBRA", argLength: 1, reg: gpfp, asm: "CEGBRA", clobberFlags: true}, // convert int64 to float32 {name: "CDGBRA", argLength: 1, reg: gpfp, asm: "CDGBRA", clobberFlags: true}, // convert int64 to float64 {name: "CLFEBR", argLength: 1, reg: fpgp, asm: "CLFEBR", clobberFlags: true}, // convert float32 to uint32 {name: "CLFDBR", argLength: 1, reg: fpgp, asm: "CLFDBR", clobberFlags: true}, // convert float64 to uint32 {name: "CLGEBR", argLength: 1, reg: fpgp, asm: "CLGEBR", clobberFlags: true}, // convert float32 to uint64 {name: "CLGDBR", argLength: 1, reg: fpgp, asm: "CLGDBR", clobberFlags: true}, // convert float64 to uint64 {name: "CELFBR", argLength: 1, reg: gpfp, asm: "CELFBR", clobberFlags: true}, // convert uint32 to float32 {name: "CDLFBR", argLength: 1, reg: gpfp, asm: "CDLFBR", clobberFlags: true}, // convert uint32 to float64 {name: "CELGBR", argLength: 1, reg: gpfp, asm: "CELGBR", clobberFlags: true}, // convert uint64 to float32 {name: "CDLGBR", argLength: 1, reg: gpfp, asm: "CDLGBR", clobberFlags: true}, // convert uint64 to float64 {name: "LEDBR", argLength: 1, reg: fp11, asm: "LEDBR"}, // convert float64 to float32 {name: "LDEBR", argLength: 1, reg: fp11, asm: "LDEBR"}, // convert float32 to float64 {name: "MOVDaddr", argLength: 1, reg: addr, aux: "SymOff", rematerializeable: true, symEffect: "Addr"}, // arg0 + auxint + offset encoded in aux {name: "MOVDaddridx", argLength: 2, reg: addridx, aux: "SymOff", symEffect: "Addr"}, // arg0 + arg1 + auxint + aux // auxint+aux == add auxint and the offset of the symbol in aux (if any) to the effective address {name: "MOVBZload", argLength: 2, reg: gpload, asm: "MOVBZ", aux: "SymOff", typ: "UInt8", faultOnNilArg0: true, symEffect: "Read"}, // load byte from arg0+auxint+aux. arg1=mem. Zero extend. {name: "MOVBload", argLength: 2, reg: gpload, asm: "MOVB", aux: "SymOff", faultOnNilArg0: true, symEffect: "Read"}, // ditto, sign extend to int64 {name: "MOVHZload", argLength: 2, reg: gpload, asm: "MOVHZ", aux: "SymOff", typ: "UInt16", faultOnNilArg0: true, symEffect: "Read"}, // load 2 bytes from arg0+auxint+aux. arg1=mem. Zero extend. {name: "MOVHload", argLength: 2, reg: gpload, asm: "MOVH", aux: "SymOff", faultOnNilArg0: true, symEffect: "Read"}, // ditto, sign extend to int64 {name: "MOVWZload", argLength: 2, reg: gpload, asm: "MOVWZ", aux: "SymOff", typ: "UInt32", faultOnNilArg0: true, symEffect: "Read"}, // load 4 bytes from arg0+auxint+aux. arg1=mem. Zero extend. {name: "MOVWload", argLength: 2, reg: gpload, asm: "MOVW", aux: "SymOff", faultOnNilArg0: true, symEffect: "Read"}, // ditto, sign extend to int64 {name: "MOVDload", argLength: 2, reg: gpload, asm: "MOVD", aux: "SymOff", typ: "UInt64", faultOnNilArg0: true, symEffect: "Read"}, // load 8 bytes from arg0+auxint+aux. arg1=mem {name: "MOVWBR", argLength: 1, reg: gp11, asm: "MOVWBR"}, // arg0 swap bytes {name: "MOVDBR", argLength: 1, reg: gp11, asm: "MOVDBR"}, // arg0 swap bytes {name: "MOVHBRload", argLength: 2, reg: gpload, asm: "MOVHBR", aux: "SymOff", typ: "UInt16", faultOnNilArg0: true, symEffect: "Read"}, // load 2 bytes from arg0+auxint+aux. arg1=mem. Reverse bytes. {name: "MOVWBRload", argLength: 2, reg: gpload, asm: "MOVWBR", aux: "SymOff", typ: "UInt32", faultOnNilArg0: true, symEffect: "Read"}, // load 4 bytes from arg0+auxint+aux. arg1=mem. Reverse bytes. {name: "MOVDBRload", argLength: 2, reg: gpload, asm: "MOVDBR", aux: "SymOff", typ: "UInt64", faultOnNilArg0: true, symEffect: "Read"}, // load 8 bytes from arg0+auxint+aux. arg1=mem. Reverse bytes. {name: "MOVBstore", argLength: 3, reg: gpstore, asm: "MOVB", aux: "SymOff", typ: "Mem", faultOnNilArg0: true, symEffect: "Write"}, // store byte in arg1 to arg0+auxint+aux. arg2=mem {name: "MOVHstore", argLength: 3, reg: gpstore, asm: "MOVH", aux: "SymOff", typ: "Mem", faultOnNilArg0: true, symEffect: "Write"}, // store 2 bytes in arg1 to arg0+auxint+aux. arg2=mem {name: "MOVWstore", argLength: 3, reg: gpstore, asm: "MOVW", aux: "SymOff", typ: "Mem", faultOnNilArg0: true, symEffect: "Write"}, // store 4 bytes in arg1 to arg0+auxint+aux. arg2=mem {name: "MOVDstore", argLength: 3, reg: gpstore, asm: "MOVD", aux: "SymOff", typ: "Mem", faultOnNilArg0: true, symEffect: "Write"}, // store 8 bytes in arg1 to arg0+auxint+aux. arg2=mem {name: "MOVHBRstore", argLength: 3, reg: gpstorebr, asm: "MOVHBR", aux: "SymOff", typ: "Mem", faultOnNilArg0: true, symEffect: "Write"}, // store 2 bytes in arg1 to arg0+auxint+aux. arg2=mem. Reverse bytes. {name: "MOVWBRstore", argLength: 3, reg: gpstorebr, asm: "MOVWBR", aux: "SymOff", typ: "Mem", faultOnNilArg0: true, symEffect: "Write"}, // store 4 bytes in arg1 to arg0+auxint+aux. arg2=mem. Reverse bytes. {name: "MOVDBRstore", argLength: 3, reg: gpstorebr, asm: "MOVDBR", aux: "SymOff", typ: "Mem", faultOnNilArg0: true, symEffect: "Write"}, // store 8 bytes in arg1 to arg0+auxint+aux. arg2=mem. Reverse bytes. {name: "MVC", argLength: 3, reg: gpmvc, asm: "MVC", aux: "SymValAndOff", typ: "Mem", clobberFlags: true, faultOnNilArg0: true, faultOnNilArg1: true, symEffect: "None"}, // arg0=destptr, arg1=srcptr, arg2=mem, auxint=size,off // indexed loads/stores {name: "MOVBZloadidx", argLength: 3, reg: gploadidx, commutative: true, asm: "MOVBZ", aux: "SymOff", typ: "UInt8", symEffect: "Read"}, // load a byte from arg0+arg1+auxint+aux. arg2=mem. Zero extend. {name: "MOVBloadidx", argLength: 3, reg: gploadidx, commutative: true, asm: "MOVB", aux: "SymOff", typ: "Int8", symEffect: "Read"}, // load a byte from arg0+arg1+auxint+aux. arg2=mem. Sign extend. {name: "MOVHZloadidx", argLength: 3, reg: gploadidx, commutative: true, asm: "MOVHZ", aux: "SymOff", typ: "UInt16", symEffect: "Read"}, // load 2 bytes from arg0+arg1+auxint+aux. arg2=mem. Zero extend. {name: "MOVHloadidx", argLength: 3, reg: gploadidx, commutative: true, asm: "MOVH", aux: "SymOff", typ: "Int16", symEffect: "Read"}, // load 2 bytes from arg0+arg1+auxint+aux. arg2=mem. Sign extend. {name: "MOVWZloadidx", argLength: 3, reg: gploadidx, commutative: true, asm: "MOVWZ", aux: "SymOff", typ: "UInt32", symEffect: "Read"}, // load 4 bytes from arg0+arg1+auxint+aux. arg2=mem. Zero extend. {name: "MOVWloadidx", argLength: 3, reg: gploadidx, commutative: true, asm: "MOVW", aux: "SymOff", typ: "Int32", symEffect: "Read"}, // load 4 bytes from arg0+arg1+auxint+aux. arg2=mem. Sign extend. {name: "MOVDloadidx", argLength: 3, reg: gploadidx, commutative: true, asm: "MOVD", aux: "SymOff", typ: "UInt64", symEffect: "Read"}, // load 8 bytes from arg0+arg1+auxint+aux. arg2=mem {name: "MOVHBRloadidx", argLength: 3, reg: gploadidx, commutative: true, asm: "MOVHBR", aux: "SymOff", typ: "Int16", symEffect: "Read"}, // load 2 bytes from arg0+arg1+auxint+aux. arg2=mem. Reverse bytes. {name: "MOVWBRloadidx", argLength: 3, reg: gploadidx, commutative: true, asm: "MOVWBR", aux: "SymOff", typ: "Int32", symEffect: "Read"}, // load 4 bytes from arg0+arg1+auxint+aux. arg2=mem. Reverse bytes. {name: "MOVDBRloadidx", argLength: 3, reg: gploadidx, commutative: true, asm: "MOVDBR", aux: "SymOff", typ: "Int64", symEffect: "Read"}, // load 8 bytes from arg0+arg1+auxint+aux. arg2=mem. Reverse bytes. {name: "MOVBstoreidx", argLength: 4, reg: gpstoreidx, commutative: true, asm: "MOVB", aux: "SymOff", symEffect: "Write"}, // store byte in arg2 to arg0+arg1+auxint+aux. arg3=mem {name: "MOVHstoreidx", argLength: 4, reg: gpstoreidx, commutative: true, asm: "MOVH", aux: "SymOff", symEffect: "Write"}, // store 2 bytes in arg2 to arg0+arg1+auxint+aux. arg3=mem {name: "MOVWstoreidx", argLength: 4, reg: gpstoreidx, commutative: true, asm: "MOVW", aux: "SymOff", symEffect: "Write"}, // store 4 bytes in arg2 to arg0+arg1+auxint+aux. arg3=mem {name: "MOVDstoreidx", argLength: 4, reg: gpstoreidx, commutative: true, asm: "MOVD", aux: "SymOff", symEffect: "Write"}, // store 8 bytes in arg2 to arg0+arg1+auxint+aux. arg3=mem {name: "MOVHBRstoreidx", argLength: 4, reg: gpstoreidx, commutative: true, asm: "MOVHBR", aux: "SymOff", symEffect: "Write"}, // store 2 bytes in arg2 to arg0+arg1+auxint+aux. arg3=mem. Reverse bytes. {name: "MOVWBRstoreidx", argLength: 4, reg: gpstoreidx, commutative: true, asm: "MOVWBR", aux: "SymOff", symEffect: "Write"}, // store 4 bytes in arg2 to arg0+arg1+auxint+aux. arg3=mem. Reverse bytes. {name: "MOVDBRstoreidx", argLength: 4, reg: gpstoreidx, commutative: true, asm: "MOVDBR", aux: "SymOff", symEffect: "Write"}, // store 8 bytes in arg2 to arg0+arg1+auxint+aux. arg3=mem. Reverse bytes. // For storeconst ops, the AuxInt field encodes both // the value to store and an address offset of the store. // Cast AuxInt to a ValAndOff to extract Val and Off fields. {name: "MOVBstoreconst", argLength: 2, reg: gpstoreconst, asm: "MOVB", aux: "SymValAndOff", typ: "Mem", faultOnNilArg0: true, symEffect: "Write"}, // store low byte of ValAndOff(AuxInt).Val() to arg0+ValAndOff(AuxInt).Off()+aux. arg1=mem {name: "MOVHstoreconst", argLength: 2, reg: gpstoreconst, asm: "MOVH", aux: "SymValAndOff", typ: "Mem", faultOnNilArg0: true, symEffect: "Write"}, // store low 2 bytes of ... {name: "MOVWstoreconst", argLength: 2, reg: gpstoreconst, asm: "MOVW", aux: "SymValAndOff", typ: "Mem", faultOnNilArg0: true, symEffect: "Write"}, // store low 4 bytes of ... {name: "MOVDstoreconst", argLength: 2, reg: gpstoreconst, asm: "MOVD", aux: "SymValAndOff", typ: "Mem", faultOnNilArg0: true, symEffect: "Write"}, // store 8 bytes of ... {name: "CLEAR", argLength: 2, reg: regInfo{inputs: []regMask{ptr, 0}}, asm: "CLEAR", aux: "SymValAndOff", typ: "Mem", clobberFlags: true, faultOnNilArg0: true, symEffect: "Write"}, {name: "CALLstatic", argLength: 1, reg: regInfo{clobbers: callerSave}, aux: "CallOff", clobberFlags: true, call: true}, // call static function aux.(*obj.LSym). arg0=mem, auxint=argsize, returns mem {name: "CALLtail", argLength: 1, reg: regInfo{clobbers: callerSave}, aux: "CallOff", clobberFlags: true, call: true, tailCall: true}, // tail call static function aux.(*obj.LSym). arg0=mem, auxint=argsize, returns mem {name: "CALLclosure", argLength: 3, reg: regInfo{inputs: []regMask{ptrsp, buildReg("R12"), 0}, clobbers: callerSave}, aux: "CallOff", clobberFlags: true, call: true}, // call function via closure. arg0=codeptr, arg1=closure, arg2=mem, auxint=argsize, returns mem {name: "CALLinter", argLength: 2, reg: regInfo{inputs: []regMask{ptr}, clobbers: callerSave}, aux: "CallOff", clobberFlags: true, call: true}, // call fn by pointer. arg0=codeptr, arg1=mem, auxint=argsize, returns mem // (InvertFlags (CMP a b)) == (CMP b a) // InvertFlags is a pseudo-op which can't appear in assembly output. {name: "InvertFlags", argLength: 1}, // reverse direction of arg0 // Pseudo-ops {name: "LoweredGetG", argLength: 1, reg: gp01}, // arg0=mem // Scheduler ensures LoweredGetClosurePtr occurs only in entry block, // and sorts it to the very beginning of the block to prevent other // use of R12 (the closure pointer) {name: "LoweredGetClosurePtr", reg: regInfo{outputs: []regMask{buildReg("R12")}}, zeroWidth: true}, // arg0=ptr,arg1=mem, returns void. Faults if ptr is nil. // LoweredGetCallerSP returns the SP of the caller of the current function. arg0=mem. {name: "LoweredGetCallerSP", argLength: 1, reg: gp01, rematerializeable: true}, // LoweredGetCallerPC evaluates to the PC to which its "caller" will return. // I.e., if f calls g "calls" sys.GetCallerPC, // the result should be the PC within f that g will return to. // See runtime/stubs.go for a more detailed discussion. {name: "LoweredGetCallerPC", reg: gp01, rematerializeable: true}, {name: "LoweredNilCheck", argLength: 2, reg: regInfo{inputs: []regMask{ptrsp}}, clobberFlags: true, nilCheck: true, faultOnNilArg0: true}, // Round ops to block fused-multiply-add extraction. {name: "LoweredRound32F", argLength: 1, reg: fp11, resultInArg0: true, zeroWidth: true}, {name: "LoweredRound64F", argLength: 1, reg: fp11, resultInArg0: true, zeroWidth: true}, // LoweredWB invokes runtime.gcWriteBarrier. arg0=mem, aux=# of buffer entries needed // It saves all GP registers if necessary, // but clobbers R14 (LR) because it's a call, // and also clobbers R1 as the PLT stub does. // Returns a pointer to a write barrier buffer in R9. {name: "LoweredWB", argLength: 1, reg: regInfo{clobbers: (callerSave &^ gpg) | buildReg("R14") | r1, outputs: []regMask{r9}}, clobberFlags: true, aux: "Int64"}, // There are three of these functions so that they can have three different register inputs. // When we check 0 <= c <= cap (A), then 0 <= b <= c (B), then 0 <= a <= b (C), we want the // default registers to match so we don't need to copy registers around unnecessarily. {name: "LoweredPanicBoundsA", argLength: 3, aux: "Int64", reg: regInfo{inputs: []regMask{r2, r3}}, typ: "Mem", call: true}, // arg0=idx, arg1=len, arg2=mem, returns memory. AuxInt contains report code (see PanicBounds in generic.go). {name: "LoweredPanicBoundsB", argLength: 3, aux: "Int64", reg: regInfo{inputs: []regMask{r1, r2}}, typ: "Mem", call: true}, // arg0=idx, arg1=len, arg2=mem, returns memory. AuxInt contains report code (see PanicBounds in generic.go). {name: "LoweredPanicBoundsC", argLength: 3, aux: "Int64", reg: regInfo{inputs: []regMask{r0, r1}}, typ: "Mem", call: true}, // arg0=idx, arg1=len, arg2=mem, returns memory. AuxInt contains report code (see PanicBounds in generic.go). // Constant condition code values. The condition code can be 0, 1, 2 or 3. {name: "FlagEQ"}, // CC=0 (equal) {name: "FlagLT"}, // CC=1 (less than) {name: "FlagGT"}, // CC=2 (greater than) {name: "FlagOV"}, // CC=3 (overflow) // Fast-BCR-serialization to ensure store-load ordering. {name: "SYNC", argLength: 1, reg: sync, asm: "SYNC", typ: "Mem"}, // Atomic loads. These are just normal loads but return tuples // so they can be properly ordered with other loads. // load from arg0+auxint+aux. arg1=mem. {name: "MOVBZatomicload", argLength: 2, reg: gpload, asm: "MOVBZ", aux: "SymOff", faultOnNilArg0: true, symEffect: "Read"}, {name: "MOVWZatomicload", argLength: 2, reg: gpload, asm: "MOVWZ", aux: "SymOff", faultOnNilArg0: true, symEffect: "Read"}, {name: "MOVDatomicload", argLength: 2, reg: gpload, asm: "MOVD", aux: "SymOff", faultOnNilArg0: true, symEffect: "Read"}, // Atomic stores. These are just normal stores. // store arg1 to arg0+auxint+aux. arg2=mem. {name: "MOVBatomicstore", argLength: 3, reg: gpstore, asm: "MOVB", aux: "SymOff", typ: "Mem", clobberFlags: true, faultOnNilArg0: true, hasSideEffects: true, symEffect: "Write"}, {name: "MOVWatomicstore", argLength: 3, reg: gpstore, asm: "MOVW", aux: "SymOff", typ: "Mem", clobberFlags: true, faultOnNilArg0: true, hasSideEffects: true, symEffect: "Write"}, {name: "MOVDatomicstore", argLength: 3, reg: gpstore, asm: "MOVD", aux: "SymOff", typ: "Mem", clobberFlags: true, faultOnNilArg0: true, hasSideEffects: true, symEffect: "Write"}, // Atomic adds. // *(arg0+auxint+aux) += arg1. arg2=mem. // Returns a tuple of . {name: "LAA", argLength: 3, reg: gpstorelaa, asm: "LAA", typ: "(UInt32,Mem)", aux: "SymOff", clobberFlags: true, faultOnNilArg0: true, hasSideEffects: true, symEffect: "RdWr"}, {name: "LAAG", argLength: 3, reg: gpstorelaa, asm: "LAAG", typ: "(UInt64,Mem)", aux: "SymOff", clobberFlags: true, faultOnNilArg0: true, hasSideEffects: true, symEffect: "RdWr"}, {name: "AddTupleFirst32", argLength: 2}, // arg1=tuple . Returns . {name: "AddTupleFirst64", argLength: 2}, // arg1=tuple . Returns . // Atomic bitwise operations. // Note: 'floor' operations round the pointer down to the nearest word boundary // which reflects how they are used in the runtime. {name: "LAN", argLength: 3, reg: gpstore, asm: "LAN", typ: "Mem", clobberFlags: true, hasSideEffects: true}, // *arg0 &= arg1. arg2 = mem. {name: "LANfloor", argLength: 3, reg: gpstorelab, asm: "LAN", typ: "Mem", clobberFlags: true, hasSideEffects: true}, // *(floor(arg0, 4)) &= arg1. arg2 = mem. {name: "LAO", argLength: 3, reg: gpstore, asm: "LAO", typ: "Mem", clobberFlags: true, hasSideEffects: true}, // *arg0 |= arg1. arg2 = mem. {name: "LAOfloor", argLength: 3, reg: gpstorelab, asm: "LAO", typ: "Mem", clobberFlags: true, hasSideEffects: true}, // *(floor(arg0, 4)) |= arg1. arg2 = mem. // Compare and swap. // arg0 = pointer, arg1 = old value, arg2 = new value, arg3 = memory. // if *(arg0+auxint+aux) == arg1 { // *(arg0+auxint+aux) = arg2 // return (true, memory) // } else { // return (false, memory) // } // Note that these instructions also return the old value in arg1, but we ignore it. // TODO: have these return flags instead of bool. The current system generates: // CS ... // MOVD $0, ret // BNE 2(PC) // MOVD $1, ret // CMPW ret, $0 // BNE ... // instead of just // CS ... // BEQ ... // but we can't do that because memory-using ops can't generate flags yet // (flagalloc wants to move flag-generating instructions around). {name: "LoweredAtomicCas32", argLength: 4, reg: cas, asm: "CS", aux: "SymOff", clobberFlags: true, faultOnNilArg0: true, hasSideEffects: true, symEffect: "RdWr"}, {name: "LoweredAtomicCas64", argLength: 4, reg: cas, asm: "CSG", aux: "SymOff", clobberFlags: true, faultOnNilArg0: true, hasSideEffects: true, symEffect: "RdWr"}, // Lowered atomic swaps, emulated using compare-and-swap. // store arg1 to arg0+auxint+aux, arg2=mem. {name: "LoweredAtomicExchange32", argLength: 3, reg: exchange, asm: "CS", aux: "SymOff", clobberFlags: true, faultOnNilArg0: true, hasSideEffects: true, symEffect: "RdWr"}, {name: "LoweredAtomicExchange64", argLength: 3, reg: exchange, asm: "CSG", aux: "SymOff", clobberFlags: true, faultOnNilArg0: true, hasSideEffects: true, symEffect: "RdWr"}, // find leftmost one { name: "FLOGR", argLength: 1, reg: regInfo{inputs: gponly, outputs: []regMask{buildReg("R0")}, clobbers: buildReg("R1")}, asm: "FLOGR", typ: "UInt64", clobberFlags: true, }, // population count // // Counts the number of ones in each byte of arg0 // and places the result into the corresponding byte // of the result. { name: "POPCNT", argLength: 1, reg: gp11, asm: "POPCNT", typ: "UInt64", clobberFlags: true, }, // unsigned multiplication (64x64 → 128) // // Multiply the two 64-bit input operands together and place the 128-bit result into // an even-odd register pair. The second register in the target pair also contains // one of the input operands. Since we don't currently have a way to specify an // even-odd register pair we hardcode this register pair as R2:R3. { name: "MLGR", argLength: 2, reg: regInfo{inputs: []regMask{gp, r3}, outputs: []regMask{r2, r3}}, asm: "MLGR", }, // pseudo operations to sum the output of the POPCNT instruction {name: "SumBytes2", argLength: 1, typ: "UInt8"}, // sum the rightmost 2 bytes in arg0 ignoring overflow {name: "SumBytes4", argLength: 1, typ: "UInt8"}, // sum the rightmost 4 bytes in arg0 ignoring overflow {name: "SumBytes8", argLength: 1, typ: "UInt8"}, // sum all the bytes in arg0 ignoring overflow // store multiple { name: "STMG2", argLength: 4, reg: regInfo{inputs: []regMask{ptrsp, buildReg("R1"), buildReg("R2"), 0}}, aux: "SymOff", typ: "Mem", asm: "STMG", faultOnNilArg0: true, symEffect: "Write", clobberFlags: true, // TODO(mundaym): currently uses AGFI to handle large offsets }, { name: "STMG3", argLength: 5, reg: regInfo{inputs: []regMask{ptrsp, buildReg("R1"), buildReg("R2"), buildReg("R3"), 0}}, aux: "SymOff", typ: "Mem", asm: "STMG", faultOnNilArg0: true, symEffect: "Write", clobberFlags: true, // TODO(mundaym): currently uses AGFI to handle large offsets }, { name: "STMG4", argLength: 6, reg: regInfo{inputs: []regMask{ ptrsp, buildReg("R1"), buildReg("R2"), buildReg("R3"), buildReg("R4"), 0, }}, aux: "SymOff", typ: "Mem", asm: "STMG", faultOnNilArg0: true, symEffect: "Write", clobberFlags: true, // TODO(mundaym): currently uses AGFI to handle large offsets }, { name: "STM2", argLength: 4, reg: regInfo{inputs: []regMask{ptrsp, buildReg("R1"), buildReg("R2"), 0}}, aux: "SymOff", typ: "Mem", asm: "STMY", faultOnNilArg0: true, symEffect: "Write", clobberFlags: true, // TODO(mundaym): currently uses AGFI to handle large offsets }, { name: "STM3", argLength: 5, reg: regInfo{inputs: []regMask{ptrsp, buildReg("R1"), buildReg("R2"), buildReg("R3"), 0}}, aux: "SymOff", typ: "Mem", asm: "STMY", faultOnNilArg0: true, symEffect: "Write", clobberFlags: true, // TODO(mundaym): currently uses AGFI to handle large offsets }, { name: "STM4", argLength: 6, reg: regInfo{inputs: []regMask{ ptrsp, buildReg("R1"), buildReg("R2"), buildReg("R3"), buildReg("R4"), 0, }}, aux: "SymOff", typ: "Mem", asm: "STMY", faultOnNilArg0: true, symEffect: "Write", clobberFlags: true, // TODO(mundaym): currently uses AGFI to handle large offsets }, // large move // auxint = remaining bytes after loop (rem) // arg0 = address of dst memory (in R1, changed as a side effect) // arg1 = address of src memory (in R2, changed as a side effect) // arg2 = pointer to last address to move in loop + 256 // arg3 = mem // returns mem // // mvc: MVC $256, 0(R2), 0(R1) // MOVD $256(R1), R1 // MOVD $256(R2), R2 // CMP R2, Rarg2 // BNE mvc // MVC $rem, 0(R2), 0(R1) // if rem > 0 { name: "LoweredMove", aux: "Int64", argLength: 4, reg: regInfo{ inputs: []regMask{buildReg("R1"), buildReg("R2"), gpsp}, clobbers: buildReg("R1 R2"), }, clobberFlags: true, typ: "Mem", faultOnNilArg0: true, faultOnNilArg1: true, }, // large clear // auxint = remaining bytes after loop (rem) // arg0 = address of dst memory (in R1, changed as a side effect) // arg1 = pointer to last address to zero in loop + 256 // arg2 = mem // returns mem // // clear: CLEAR $256, 0(R1) // MOVD $256(R1), R1 // CMP R1, Rarg2 // BNE clear // CLEAR $rem, 0(R1) // if rem > 0 { name: "LoweredZero", aux: "Int64", argLength: 3, reg: regInfo{ inputs: []regMask{buildReg("R1"), gpsp}, clobbers: buildReg("R1"), }, clobberFlags: true, typ: "Mem", faultOnNilArg0: true, }, } // All blocks on s390x have their condition code mask (s390x.CCMask) as the Aux value. // The condition code mask is a 4-bit mask where each bit corresponds to a condition // code value. If the value of the condition code matches a bit set in the condition // code mask then the first successor is executed. Otherwise the second successor is // executed. // // | condition code value | mask bit | // +----------------------+------------+ // | 0 (equal) | 0b1000 (8) | // | 1 (less than) | 0b0100 (4) | // | 2 (greater than) | 0b0010 (2) | // | 3 (unordered) | 0b0001 (1) | // // Note: that compare-and-branch instructions must not have bit 3 (0b0001) set. var S390Xblocks = []blockData{ // branch on condition {name: "BRC", controls: 1, aux: "S390XCCMask"}, // condition code value (flags) is Controls[0] // compare-and-branch (register-register) // - integrates comparison of Controls[0] with Controls[1] // - both control values must be in general purpose registers {name: "CRJ", controls: 2, aux: "S390XCCMask"}, // signed 32-bit integer comparison {name: "CGRJ", controls: 2, aux: "S390XCCMask"}, // signed 64-bit integer comparison {name: "CLRJ", controls: 2, aux: "S390XCCMask"}, // unsigned 32-bit integer comparison {name: "CLGRJ", controls: 2, aux: "S390XCCMask"}, // unsigned 64-bit integer comparison // compare-and-branch (register-immediate) // - integrates comparison of Controls[0] with AuxInt // - control value must be in a general purpose register // - the AuxInt value is sign-extended for signed comparisons // and zero-extended for unsigned comparisons {name: "CIJ", controls: 1, aux: "S390XCCMaskInt8"}, // signed 32-bit integer comparison {name: "CGIJ", controls: 1, aux: "S390XCCMaskInt8"}, // signed 64-bit integer comparison {name: "CLIJ", controls: 1, aux: "S390XCCMaskUint8"}, // unsigned 32-bit integer comparison {name: "CLGIJ", controls: 1, aux: "S390XCCMaskUint8"}, // unsigned 64-bit integer comparison } archs = append(archs, arch{ name: "S390X", pkg: "cmd/internal/obj/s390x", genfile: "../../s390x/ssa.go", ops: S390Xops, blocks: S390Xblocks, regnames: regNamesS390X, gpregmask: gp, fpregmask: fp, framepointerreg: -1, // not used linkreg: int8(num["R14"]), imports: []string{ "cmd/internal/obj/s390x", }, }) }